FT2232SPI Programmer

From flashrom
Revision as of 22:04, 4 September 2009 by Uwe (talk | contribs) (→‎DLP Design DLP-USB1232H: More info on SPI programmer.)
Jump to navigation Jump to search

This wiki is retired

Our website is https://www.flashrom.org, instructions on how to add or update documentation are here

All wiki content available in read-only mode at wiki.flashrom.org

Recent versions of flashrom support the -p ft2232spi option which allows you to use a FTDI FT2232H/FT4232H based device as external SPI programmer.

This is made possible by using libftdi. flashrom autodetects the presence of libftdi headers and enables FT2232H/FT4232H support if they are available.

Devices

Documentation

DLP Design DLP-USB1232H

Setup

  • Put a jumper on pins 8 and 9, which configures the device to be powered by USB. Without this jumper it will not be powered, and thus not be detected by your OS (e.g. it will not appear in the lsusb output).
  • Connect a 3.3V voltage regulator and two capacitors (e.g. 100nF and 10uF) so you can power the 3.3V SPI BIOS chip.
    • TODO: Details
  • Connect the following pins from the DLP-USB1232H to the SPI BIOS chip:
    • 18 (SK) to SCLK
    • 16 (DO) to SO# (?)
    • 2 (DI) to SI# (?)
    • 5 (CS) to CS#
    • The WP# and HOLD# pins are left unconnected (?).
  • TODO

Photos

Where to buy

FT2232H Mini-Module

Where to buy

FT4232H Mini-Module

Where to buy