[flashrom] [PATCH] Add support for every single SiS chipset out there

Adrian Glaubitz adrian.glaubitz at googlemail.com
Sun Nov 15 15:08:44 CET 2009


Hi,

On Sat, Nov 14, 2009 at 4:25 PM, Carl-Daniel Hailfinger
<c-d.hailfinger.devel.2006 at gmx.net> wrote:
> Add support for every single SiS chipset out there.
> The two existing SiS chipset enables (compared to the 28 in this patch)
> were refactored, and one of them was fixed.

here is an output of flashrom r758 together with your patch on 2 SiS boards:

AsRock K7S8XE: http://pastebin.org/53847
Elitegroup K7S5A: http://pastebin.org/53846

On both boards enabling flash write fails. I presume that write-enable
on these boards is rather set with a jumper instead from software.

On the K7S5A, reading out the flash works:

root at cyanus:..src/flashrom> ./flashrom -r flash.rom
flashrom v0.9.1-r758
No coreboot table found.
Found chipset "SiS SiS 735", enabling flash write... FAILED!
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... OK.
Found chip "Winbond W49F002U" (256 KB, Parallel) at physical address 0xfffc0000.
Reading flash... done.
root at cyanus:..src/flashrom> file flash.rom
flash.rom: DOS executable (device driver) for DOS
root at cyanus:..src/flashrom> ls -lh flash.rom
-rw-r--r-- 1 root src 256K 2009-11-15 15:08 flash.rom
root at cyanus:..src/flashrom>


Adrian




More information about the flashrom mailing list