[flashrom] [PATCH] Add Winbond W25Qxx
Rudolf Marek
r.marek at assembler.cz
Tue Apr 20 21:38:28 CEST 2010
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hmm I just tried on VT8237S and I got
Found chip "Winbond W25Q80" (1024 KB, SPI) at physical address 0xfff00000.
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
Please email a report to flashrom at flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -rV,
- -wV, -EV), and mention which mainboard or programmer you tested.
Thanks for your help!
===
Writing flash chip... Erasing flash before programming... Erasing flash chip...
spi_block_erase_20 failed during command execution at address 0x0
spi_block_erase_52 failed during command execution at address 0x0
SUCCESS.
done.
Programming page:
COMPLETE.
Verifying flash... VERIFIED.
So either I did some mistake or something else is wrong ;)
Rudolf
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkvOArQACgkQ3J9wPJqZRNXaaACfbAdJv6eCN2dF2owpN486VB85
nAYAn01T6SWMuiHueuyOLxE7vPdC9ne7
=AOIg
-----END PGP SIGNATURE-----
More information about the flashrom
mailing list