[flashrom] [Patch] Boards: Remove it8705_rom_write_enable.
libv at skynet.be
Wed Jan 20 22:41:35 CET 2010
On Wed, Jan 20, 2010 at 03:00:33PM +0100, Luc Verhaegen wrote:
> On Wed, Jan 13, 2010 at 12:33:18PM +0100, Luc Verhaegen wrote:
> > On Wed, Jan 13, 2010 at 12:14:02PM +0100, Uwe Hermann wrote:
> > > Hi,
> > >
> > > On Sun, Jan 10, 2010 at 01:19:28PM +0100, Luc Verhaegen wrote:
> > > > >From 357cbdbc7b3be6a6b685e73f723e6b5cf147bc19 Mon Sep 17 00:00:00 2001
> > > > From: Luc Verhaegen <libv at skynet.be>
> > > > Date: Sat, 26 Dec 2009 20:45:35 +0100
> > > > Subject: [PATCH] Boards: Remove it8705_rom_write_enable.
> > > >
> > > > Should be functionally the same as it8705f_write_enable_2e.
> > >
> > > Yep, except for the "Configuration Select" (bit 7) in reg 0x22, but I
> > > think we need a way to handle that better anyway (which would be an
> > > additional patch), so:
> > >
> > > Acked-by: Uwe Hermann <uwe at hermann-uwe.de>
> > >
> > > As the default for this bit is 0 and the flashrom code set it to 1 we
> > > should probably trace back which board originally used this code. That
> > > one possibly did have two Super I/Os and needed to have one of them
> > > selected explicitly (?)
> > >
> > >
> > > Uwe.
> > First of all, thanks for looking into this.
> > Secondly, this patch sadly depends on another patch which at least ties
> > the max rom decode to boards directly instead of doing this through the
> > board enable (which, amongst others, ruins our ability to sanitise board
> > enables).
> > Thirdly, the original board enable was written by Peter as part of r256
> > (originally r3364) dated June 11th 2008:
> > flashrom: Board enable and autodetection for BioStar P4M80-M4.
> > Thanks to Reinder for clean room reverse engineering and data sheet diving!
> > This board is autodetected because there are some good BioStar
> > subsystem IDs.
> > Matching uses onboard VT6420 SATA RAID with subsystem BioStar 3206 and
> > onboard UniChrome Pro IGP graphics with subsystem BioStar 1202.
> > Signed-off-by: Peter Stuge <peter at stuge.se>
> > Acked-by: Lyos Gemini Norezel <lyos.gemininorezel at gmail.com>
> > CCed Peter so he can shed a bit more light on this, in as far as he
> > still has a recollection of this, as it's been some 550 commits ago :)
> > Luc Verhaegen.
> Status of this patch: the other patch is still pending.
> Michael dug out the bios and found no such special handling. It can be
> assumed that people were just a bit too proactive when writing up the
> board enable with the datasheet by their side.
> * Ack received.
> * question mark answered.
> * blocked on max_rom_decode patch.
> * will not cleanly apply when DMI hits, but that can be handled
> Luc Verhaegen.
More information about the flashrom