[flashrom] [PATCH] Add Nvidia nForce MCP6x/MCP7x series SPI flashing support
ziltro at ziltro.com
Sun Jul 4 18:51:59 CEST 2010
On 04/07/10 09:11, Kimmo Vuorinen wrote:
> On 07/03/2010 04:29 PM, Carl-Daniel Hailfinger wrote:
>> you have sent a report for a mainboard with Nvidia nForce chipset, and
>> we now have a patch to support your chipset and would appreciate if you
>> could test (unless you can't recover in case something goes wrong).
>> The following chipsets would be nice to get reports for:
>> MCP78S: Ivo Anjo, Julian Hughes, Dietmar Gaffron, Kimmo Vuorinen, Urja
>> Rannikko, ataya65, Vikram Noel Ambrose, Marcel Partap, antioxid, Rainer
>> Stumbaum, Brad Rogers
> I also did a read test but result differs from bios image downloaded
> from mainboard manufacturer. Should this match only when default bios
> settings are used?
I found they didn't match on mine either, because of network card MAC
address and other settings.
I compared them by first running hexdump on each image, then running
diff on the two resulting files.
Large chunks were the same, and then some chunks were different, but the
different chunks were all 0xFF or 0x00 in the downloaded file.
They were similar enough for me. :)
More information about the flashrom