[flashrom] Flashrom -V output from Tyan S2915
Richard W.M. Jones
rjones at redhat.com
Fri Jul 23 16:43:42 CEST 2010
On Fri, Jul 23, 2010 at 04:02:59PM +0200, Carl-Daniel Hailfinger wrote:
> On 23.07.2010 15:06, Richard W.M. Jones wrote:
> > flashrom v0.9.2-r1099 on Linux 2.6.33.6-147.fc13.x86_64 (x86_64), built with libpci 3.1.6, GCC 4.4.4 20100630 (Red Hat 4.4.4-10), little endian
> > Calibrating delay loop... OS timer resolution is 999 usecs, 1406M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 999 us, 10000 myus = 9999 us, 3996 myus = 3999 us, OK.
> >
>
> It is highly unusual for a halfway modern Linux system to have a timer
> resolution of 1 ms. Usually the Linux kernel will use a time source
> which has 10 us accuracy or better. Is this some special distribution
> kernel?
It's Fedora 13's standard kernel:
Linux amd.home.annexia.org 2.6.33.6-147.fc13.x86_64 #1 SMP Tue Jul 6 22:32:17 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
I've attached the boot messages.
> > DMI string system-manufacturer: "# SMBIOS implementations newer than version 2.6 are not"
> > DMI string system-product-name: "# SMBIOS implementations newer than version 2.6 are not"
> > DMI string system-version: "# SMBIOS implementations newer than version 2.6 are not"
> > DMI string baseboard-manufacturer: "# SMBIOS implementations newer than version 2.6 are not"
> > DMI string baseboard-product-name: "# SMBIOS implementations newer than version 2.6 are not"
> > DMI string baseboard-version: "# SMBIOS implementations newer than version 2.6 are not"
> > DMI string chassis-type: "# SMBIOS implementations newer than version 2.6 are not"
> >
>
> Now this is a serious problem. Apparently dmidecode in Fedora has a
> patch in the RPM (dmidecode-warn-on-unsupported-smbios-version.patch)
> which breaks the original documented output format. If this only
> affected the board enables, it wouldn't be that bad (failing/corrupting
> writes on a few dozen boards which can be fixed interactively), but it
> also completely disables laptop detection and that means Fedora will get
> bug reports about hard lockups and/or disabled fans on laptops.
> I don't want to blame Fedora because this is a patch hand-picked from
> upstream dmidecode. We'll add a workaorund to flashrom ASAP.
Nice ...
CC-ing the dmidecode maintainer in Fedora.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
virt-top is 'top' for virtual machines. Tiny program with many
powerful monitoring features, net stats, disk stats, logging, etc.
http://et.redhat.com/~rjones/virt-top
-------------- next part --------------
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33.6-147.fc13.x86_64 (mockbuild at xb-01.phx2.fedoraproject.org) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Tue Jul 6 22:32:17 UTC 2010
Command line: ro root=/dev/AMDVG/AMDRoot SYSFONT=latarcyrheb-sun16 LANG=en_GB.UTF-8 KEYTABLE=uk
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000009ff60000 (usable)
BIOS-e820: 000000009ff60000 - 000000009ff6a000 (ACPI data)
BIOS-e820: 000000009ff6a000 - 000000009ff6b000 (ACPI NVS)
BIOS-e820: 000000009ff6b000 - 00000000a0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000160000000 (usable)
NX (Execute Disable) protection: active
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x160000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFE0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000160000000 aka 5632M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000a0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x9ff60 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f7940] f7940
init_memory_mapping: 0000000000000000-000000009ff60000
0000000000 - 009fe00000 page 2M
009fe00000 - 009ff60000 page 4k
kernel direct mapping tables up to 9ff60000 @ 16000-1b000
init_memory_mapping: 0000000100000000-0000000160000000
0100000000 - 0160000000 page 2M
kernel direct mapping tables up to 160000000 @ 19000-20000
RAMDISK: 37539000 - 37fefa11
ACPI: RSDP 00000000000f7910 00024 (v02 PTLTD )
ACPI: XSDT 000000009ff63b17 0005C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
ACPI: FACP 000000009ff69812 000F4 (v03 NVIDIA CK8S 06040000 PTL_ 000F4240)
ACPI: DSDT 000000009ff63b73 05C2B (v01 NVIDIA CK8 06040000 MSFT 03000000)
ACPI: FACS 000000009ff6afc0 00040
ACPI: SSDT 000000009ff69906 00574 (v01 AMD POWERNOW 06040000 AMD 00000001)
ACPI: SPCR 000000009ff69e7a 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: MCFG 000000009ff69eca 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 000000009ff69f06 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 000000009ff69f3e 0009A (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 000000009ff69fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
Number of physical nodes 2
Node 0 MemBase 0000000000000000 Limit 0000000080000000
Node 1 MemBase 0000000080000000 Limit 0000000160000000
NUMA: Using 31 for the hash shift.
Using node hash shift of 31
Bootmem setup node 0 0000000000000000-0000000080000000
NODE_DATA [000000000001b000 - 0000000000030fff]
bootmap [0000000000031000 - 0000000000040fff] pages 10
(13 early reservations) ==> bootmem [0000000000 - 0080000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 0001dba208] TEXT DATA BSS ==> [0001000000 - 0001dba208]
#2 [0037539000 - 0037fefa11] RAMDISK ==> [0037539000 - 0037fefa11]
#3 [0001dbb000 - 0001dbb160] BRK ==> [0001dbb000 - 0001dbb160]
#4 [00000f7950 - 0000100000] BIOS reserved ==> [00000f7950 - 0000100000]
#5 [00000f7940 - 00000f7950] MP-table mpf ==> [00000f7940 - 00000f7950]
#6 [000009d800 - 000009dc71] BIOS reserved ==> [000009d800 - 000009dc71]
#7 [000009ddf5 - 00000f7940] BIOS reserved ==> [000009ddf5 - 00000f7940]
#8 [000009dc71 - 000009ddf5] MP-table mpc ==> [000009dc71 - 000009ddf5]
#9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
#10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
#11 [0000016000 - 0000019000] PGTABLE ==> [0000016000 - 0000019000]
#12 [0000019000 - 000001b000] PGTABLE ==> [0000019000 - 000001b000]
Bootmem setup node 1 0000000080000000-0000000160000000
NODE_DATA [0000000080000000 - 0000000080015fff]
bootmap [0000000080016000 - 0000000080031fff] pages 1c
(13 early reservations) ==> bootmem [0080000000 - 0160000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0001000000 - 0001dba208] TEXT DATA BSS
#2 [0037539000 - 0037fefa11] RAMDISK
#3 [0001dbb000 - 0001dbb160] BRK
#4 [00000f7950 - 0000100000] BIOS reserved
#5 [00000f7940 - 00000f7950] MP-table mpf
#6 [000009d800 - 000009dc71] BIOS reserved
#7 [000009ddf5 - 00000f7940] BIOS reserved
#8 [000009dc71 - 000009ddf5] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000019000] PGTABLE
#12 [0000019000 - 000001b000] PGTABLE
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
[ffffea0001c00000-ffffea0004dfffff] PMD -> [ffff880080200000-ffff880081ffffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00160000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x00080000
1: 0x00080000 -> 0x0009ff60
1: 0x00100000 -> 0x00160000
On node 0 totalpages: 524173
DMA zone: 56 pages used for memmap
DMA zone: 109 pages reserved
DMA zone: 3816 pages, LIFO batch:0
DMA32 zone: 7112 pages used for memmap
DMA32 zone: 513080 pages, LIFO batch:31
On node 1 totalpages: 524128
DMA32 zone: 7168 pages used for memmap
DMA32 zone: 123744 pages, LIFO batch:31
Normal zone: 5376 pages used for memmap
Normal zone: 387840 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xc0000000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 17, address 0xc0000000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
PM: Registered nosave memory: 000000009ff60000 - 000000009ff6a000
PM: Registered nosave memory: 000000009ff6a000 - 000000009ff6b000
PM: Registered nosave memory: 000000009ff6b000 - 00000000a0000000
PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880003c00000 s90520 r8192 d24168 u1048576
pcpu-alloc: s90520 r8192 d24168 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 [1] 2 3
Built 2 zonelists in Node order, mobility grouping on. Total pages: 1028480
Policy zone: Normal
Kernel command line: ro root=/dev/AMDVG/AMDRoot SYSFONT=latarcyrheb-sun16 LANG=en_GB.UTF-8 KEYTABLE=uk
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 3976128k/5767168k available (4292k kernel code, 1573964k absent, 217076k reserved, 7535k data, 760k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:848
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2799.983 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.96 BogoMIPS (lpj=2799983)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 009ff80000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
Booting Node 0, Processors #1 Ok.
Booting Node 1, Processors #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (22398.96 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=584 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=792 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=5960 bytes
devtmpfs: initialized
regulator: core version 0.5
Time: 0:03:07 Date: 01/01/06
NET: Registered protocol family 16
node 0 link 2: io port [1000, 2fff]
node 1 link 0: io port [3000, 3fff]
node 1 link 0: io port [f000, ffff]
TOM: 00000000a0000000 aka 2560M
node 0 link 2: mmio [a0000000, bfffffff]
node 1 link 0: mmio [c0000000, cfffffff]
node 0 link 2: mmio [a0000, bffff]
node 0 link 2: mmio [e0000000, e7ffffff]
node 1 link 0: mmio [e8000000, efffffff]
TOM2: 0000000160000000 aka 5632M
bus: [00, 7f] on node 0 link 2
bus: 00 index 0 io port: [0, 2fff]
bus: 00 index 1 io port: [4000, efff]
bus: 00 index 2 mmio: [a0000000, bfffffff]
bus: 00 index 3 mmio: [a0000, bffff]
bus: 00 index 4 mmio: [d0000000, e7ffffff]
bus: 00 index 5 mmio: [f0000000, ffffffff]
bus: 00 index 6 mmio: [160000000, fcffffffff]
bus: [80, ff] on node 1 link 0
bus: 80 index 0 io port: [3000, 3fff]
bus: 80 index 1 io port: [f000, ffff]
bus: 80 index 2 mmio: [c0000000, cfffffff]
bus: 80 index 3 mmio: [e8000000, efffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-82] at [mem 0xe0000000-0xe82fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe82fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0x2fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xa0000000-0xbfffffff] (ignored)
pci 0000:00:01.0: reg 10: [io 0x1c00-0x1c7f]
pci 0000:00:01.1: reg 10: [io 0x2000-0x203f]
pci 0000:00:01.1: reg 20: [io 0x2440-0x247f]
pci 0000:00:01.1: reg 24: [io 0x2400-0x243f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xa0004000-0xa0004fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xa0005000-0xa00050ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 20: [io 0x2480-0x248f]
pci 0000:00:05.0: reg 10: [io 0x24d0-0x24d7]
pci 0000:00:05.0: reg 14: [io 0x24c4-0x24c7]
pci 0000:00:05.0: reg 18: [io 0x24c8-0x24cf]
pci 0000:00:05.0: reg 1c: [io 0x24c0-0x24c3]
pci 0000:00:05.0: reg 20: [io 0x2490-0x249f]
pci 0000:00:05.0: reg 24: [mem 0xa0006000-0xa0006fff]
pci 0000:00:05.1: reg 10: [io 0x24e8-0x24ef]
pci 0000:00:05.1: reg 14: [io 0x24dc-0x24df]
pci 0000:00:05.1: reg 18: [io 0x24e0-0x24e7]
pci 0000:00:05.1: reg 1c: [io 0x24d8-0x24db]
pci 0000:00:05.1: reg 20: [io 0x24a0-0x24af]
pci 0000:00:05.1: reg 24: [mem 0xa0007000-0xa0007fff]
pci 0000:00:05.2: reg 10: [io 0x2800-0x2807]
pci 0000:00:05.2: reg 14: [io 0x24f4-0x24f7]
pci 0000:00:05.2: reg 18: [io 0x24f8-0x24ff]
pci 0000:00:05.2: reg 1c: [io 0x24f0-0x24f3]
pci 0000:00:05.2: reg 20: [io 0x24b0-0x24bf]
pci 0000:00:05.2: reg 24: [mem 0xa0008000-0xa0008fff]
pci 0000:00:06.1: reg 10: [mem 0xa0000000-0xa0003fff]
pci 0000:00:06.1: PME# supported from D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: reg 10: [mem 0xa0009000-0xa0009fff]
pci 0000:00:08.0: reg 14: [io 0x2808-0x280f]
pci 0000:00:08.0: reg 18: [mem 0xa0005800-0xa00058ff]
pci 0000:00:08.0: reg 1c: [mem 0xa0005400-0xa000540f]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: reg 10: [mem 0xa000b000-0xa000bfff]
pci 0000:00:09.0: reg 14: [io 0x2810-0x2817]
pci 0000:00:09.0: reg 18: [mem 0xa000a000-0xa000a0ff]
pci 0000:00:09.0: reg 1c: [mem 0xa0005c00-0xa0005c0f]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: PME# disabled
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:05.0: reg 10: [mem 0xa0104000-0xa01047ff]
pci 0000:01:05.0: reg 14: [mem 0xa0100000-0xa0103fff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:05.0: PME# disabled
pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0xa0100000-0xa01fffff]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10: [mem 0xa0200000-0xa020007f 64bit]
pci 0000:03:00.1: supports D1
pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0d.0: PCI bridge to [bus 03-05]
pci 0000:00:0d.0: bridge window [mem 0xa0200000-0xa02fffff]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.1: PCI bridge to [bus 05-05]
pci 0000:06:00.0: reg 10: [mem 0xa2000000-0xa2ffffff]
pci 0000:06:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:06:00.0: reg 1c: [mem 0xa1000000-0xa1ffffff 64bit]
pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0f.0: PCI bridge to [bus 06-06]
pci 0000:00:0f.0: bridge window [mem 0xa1000000-0xa2ffffff]
pci 0000:00:0f.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:80)
pci_root PNP0A03:01: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:01: host bridge window [io 0x3000-0xffff] (ignored)
pci_root PNP0A03:01: host bridge window [io 0x03b0-0x03df] (ignored)
pci_root PNP0A03:01: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:01: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:01: host bridge window [mem 0xc0000000-0xcfffffff] (ignored)
pci 0000:80:01.0: reg 10: [io 0xfc00-0xfc7f]
pci 0000:80:01.0: reg 14: [mem 0xc0000000-0xc0000fff]
pci 0000:80:01.1: reg 10: [io 0x3000-0x303f]
pci 0000:80:01.1: reg 20: [io 0x3440-0x347f]
pci 0000:80:01.1: reg 24: [io 0x3400-0x343f]
pci 0000:80:01.1: PME# supported from D3hot D3cold
pci 0000:80:01.1: PME# disabled
pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0a.0: PME# disabled
pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0d.0: PME# disabled
pci 0000:80:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0f.0: PME# disabled
PCI: peer root bus 80 res updated from pci conf
pci 0000:80:0a.0: PCI bridge to [bus 81-81]
pci 0000:80:0d.0: PCI bridge to [bus 82-82]
pci 0000:80:0f.0: PCI bridge to [bus 83-83]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR5._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LMA2] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LUS2] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 5 *7 10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LSI1] (IRQs *5 7 10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LSI2] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus #00
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:03: [mem 0xa0040000-0xa0047fff] has been reserved
system 00:04: [io 0x1000-0x107f] has been reserved
system 00:04: [io 0x1080-0x10ff] has been reserved
system 00:04: [io 0x1400-0x147f] has been reserved
system 00:04: [io 0x1480-0x14ff] has been reserved
system 00:04: [io 0x1800-0x187f] has been reserved
system 00:04: [io 0x1880-0x18ff] has been reserved
system 00:04: [io 0x2440-0x247f] has been reserved
system 00:04: [io 0x2400-0x243f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0600-0x06fe] has been reserved
system 00:07: [io 0x0c05-0x0c06] has been reserved
system 00:0f: [mem 0xc0040000-0xc0047fff] has been reserved
system 00:10: [io 0xf000-0xf07f] has been reserved
system 00:10: [io 0xf080-0xf0ff] has been reserved
system 00:10: [io 0xf400-0xf47f] has been reserved
system 00:10: [io 0xf480-0xf4ff] has been reserved
system 00:10: [io 0xf800-0xf87f] has been reserved
system 00:10: [io 0xf880-0xf8ff] has been reserved
pci 0000:00:06.0: PCI bridge to [bus 01-01]
pci 0000:00:06.0: bridge window [io disabled]
pci 0000:00:06.0: bridge window [mem 0xa0100000-0xa01fffff]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io disabled]
pci 0000:00:0a.0: bridge window [mem disabled]
pci 0000:00:0a.0: bridge window [mem pref disabled]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0: bridge window [io disabled]
pci 0000:03:00.0: bridge window [mem disabled]
pci 0000:03:00.0: bridge window [mem pref disabled]
pci 0000:03:00.1: PCI bridge to [bus 05-05]
pci 0000:03:00.1: bridge window [io disabled]
pci 0000:03:00.1: bridge window [mem disabled]
pci 0000:03:00.1: bridge window [mem pref disabled]
pci 0000:00:0d.0: PCI bridge to [bus 03-05]
pci 0000:00:0d.0: bridge window [io disabled]
pci 0000:00:0d.0: bridge window [mem 0xa0200000-0xa02fffff]
pci 0000:00:0d.0: bridge window [mem pref disabled]
pci 0000:06:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:0f.0: PCI bridge to [bus 06-06]
pci 0000:00:0f.0: bridge window [io disabled]
pci 0000:00:0f.0: bridge window [mem 0xa1000000-0xa2ffffff]
pci 0000:00:0f.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:03:00.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 23
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
pci 0000:03:00.1: PCI INT A -> Link[LK4E] -> GSI 23 (level, low) -> IRQ 23
pci 0000:03:00.1: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci 0000:80:0a.0: PCI bridge to [bus 81-81]
pci 0000:80:0a.0: bridge window [io disabled]
pci 0000:80:0a.0: bridge window [mem disabled]
pci 0000:80:0a.0: bridge window [mem pref disabled]
pci 0000:80:0d.0: PCI bridge to [bus 82-82]
pci 0000:80:0d.0: bridge window [io disabled]
pci 0000:80:0d.0: bridge window [mem disabled]
pci 0000:80:0d.0: bridge window [mem pref disabled]
pci 0000:80:0f.0: PCI bridge to [bus 83-83]
pci 0000:80:0f.0: bridge window [io disabled]
pci 0000:80:0f.0: bridge window [mem disabled]
pci 0000:80:0f.0: bridge window [mem pref disabled]
pci 0000:80:0a.0: setting latency timer to 64
pci 0000:80:0d.0: setting latency timer to 64
pci 0000:80:0f.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0x2fff]
pci_bus 0000:00: resource 1 [io 0x4000-0xefff]
pci_bus 0000:00: resource 2 [mem 0xa0000000-0xbfffffff]
pci_bus 0000:00: resource 3 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 4 [mem 0xd0000000-0xe7ffffff]
pci_bus 0000:00: resource 5 [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: resource 6 [mem 0x160000000-0xfcffffffff]
pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff]
pci_bus 0000:01: resource 3 [io 0x0000-0x2fff]
pci_bus 0000:01: resource 4 [io 0x4000-0xefff]
pci_bus 0000:01: resource 5 [mem 0xa0000000-0xbfffffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0xd0000000-0xe7ffffff]
pci_bus 0000:01: resource 8 [mem 0xf0000000-0xffffffff]
pci_bus 0000:01: resource 9 [mem 0x160000000-0xfcffffffff]
pci_bus 0000:03: resource 1 [mem 0xa0200000-0xa02fffff]
pci_bus 0000:06: resource 1 [mem 0xa1000000-0xa2ffffff]
pci_bus 0000:06: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
pci_bus 0000:80: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:80: resource 1 [io 0xf000-0xffff]
pci_bus 0000:80: resource 2 [mem 0xc0000000-0xcfffffff]
pci_bus 0000:80: resource 3 [mem 0xe8000000-0xefffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:06:00.0: Boot video device
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 10970k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Simple Boot Flag at 0x37 set to 0x80
audit: initializing netlink socket (disabled)
type=2000 audit(1136073786.867:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7916
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0a.0: irq 48 for MSI/MSI-X
pcieport 0000:00:0d.0: setting latency timer to 64
alloc irq_desc for 49 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0d.0: irq 49 for MSI/MSI-X
pcieport 0000:00:0f.0: setting latency timer to 64
alloc irq_desc for 50 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0f.0: irq 50 for MSI/MSI-X
pcieport 0000:80:0a.0: setting latency timer to 64
alloc irq_desc for 51 on node 1
alloc kstat_irqs on node 1
pcieport 0000:80:0a.0: irq 51 for MSI/MSI-X
pcieport 0000:80:0d.0: setting latency timer to 64
alloc irq_desc for 52 on node 1
alloc kstat_irqs on node 1
pcieport 0000:80:0d.0: irq 52 for MSI/MSI-X
pcieport 0000:80:0f.0: setting latency timer to 64
alloc irq_desc for 53 on node 1
alloc kstat_irqs on node 1
pcieport 0000:80:0f.0: irq 53 for MSI/MSI-X
aer 0000:00:0a.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0f.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:80:0a.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:80:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:80:0f.0:pcie02: AER service couldn't init device: no _OSC support
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xa0005000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.6-147.fc13.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xa0004000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.6-147.fc13.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel at redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 6:550:50
rtc_cmos 00:0a: setting system clock to 2006-01-01 00:03:08 UTC (1136073788)
Initalizing network drop monitor service
Freeing unused kernel memory: 760k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1832k freed
Freeing unused kernel memory: 1964k freed
dracut: dracut-005-3.fc13
udev: starting version 151
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 20
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
nouveau 0000:06:00.0: PCI INT A -> Link[LK2E] -> GSI 20 (level, low) -> IRQ 20
nouveau 0000:06:00.0: setting latency timer to 64
[drm] nouveau 0000:06:00.0: Detected an NV40 generation card (0x044100a2)
[drm] nouveau 0000:06:00.0: Attempting to load BIOS image from PROM
usb 2-8: new low speed USB device using ohci_hcd and address 2
[drm] nouveau 0000:06:00.0: ... appears to be valid
[drm] nouveau 0000:06:00.0: BIT BIOS found
[drm] nouveau 0000:06:00.0: Bios version 05.44.02.52
[drm] nouveau 0000:06:00.0: BIT table 'd' not found
[drm] nouveau 0000:06:00.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:06:00.0: Raw DCB entry 0: 01000300 00000028
[drm] nouveau 0000:06:00.0: Raw DCB entry 1: 02011310 00000028
[drm] nouveau 0000:06:00.0: Raw DCB entry 2: 01011312 00000000
[drm] nouveau 0000:06:00.0: Raw DCB entry 3: 020223f1 0080c020
[drm] nouveau 0000:06:00.0: DCB connector table: VHER 0x30 5 7 2
[drm] nouveau 0000:06:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:06:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:06:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:06:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:06:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 0 at offset 0xDF10
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 1 at offset 0xE26F
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 2 at offset 0xE7A9
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 3 at offset 0xE906
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 4 at offset 0xEAAE
[drm] nouveau 0000:06:00.0: Detected 256MiB VRAM
[TTM] Zone kernel: Available graphics memory: 2028804 kiB.
[ttm] Initializing pool allocator.
[drm] nouveau 0000:06:00.0: 64 MiB GART (aperture)
[drm] nouveau 0000:06:00.0: Allocating FIFO number 0
[drm] nouveau 0000:06:00.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:06:00.0: Initial CRTC_OWNER is 0
[drm] nouveau 0000:06:00.0: Saving VGA fonts
usb 2-8: New USB device found, idVendor=04f2, idProduct=0116
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8: Product: USB Keyboard
usb 2-8: Manufacturer: CHICONY
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input3
generic-usb 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:02.0-8/input0
[drm] nouveau 0000:06:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:06:00.0: Setting dpms mode 3 on vga encoder (output 1)
[drm] nouveau 0000:06:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[drm] nouveau 0000:06:00.0: Setting dpms mode 3 on TV encoder (output 3)
[drm] nouveau 0000:06:00.0: allocated 1680x1050 fb: 0x49000, bo ffff88007c354e00
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:06:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[drm] nouveau 0000:06:00.0: 0xD33F: Parsing digital output script table
[drm] nouveau 0000:06:00.0: Setting dpms mode 0 on tmds encoder (output 2)
[drm] nouveau 0000:06:00.0: Output DVI-I-1 is running on CRTC 0 using output A
Console: switching to colour frame buffer device 210x65
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:06:00.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
pata_amd 0000:00:04.0: version 0.4.1
pata_amd 0000:00:04.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2480 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2488 irq 15
sata_nv 0000:00:05.0: version 3.5
sata_nv 0000:00:05.0: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 19
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
sata_nv 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 19 (level, low) -> IRQ 19
sata_nv 0000:00:05.0: Using SWNCQ mode
sata_nv 0000:00:05.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x24d0 ctl 0x24c4 bmdma 0x2490 irq 19
ata4: SATA max UDMA/133 cmd 0x24c8 ctl 0x24c0 bmdma 0x2498 irq 19
sata_nv 0000:00:05.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 18
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
sata_nv 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 18 (level, low) -> IRQ 18
sata_nv 0000:00:05.1: Using SWNCQ mode
sata_nv 0000:00:05.1: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x24e8 ctl 0x24dc bmdma 0x24a0 irq 18
ata6: SATA max UDMA/133 cmd 0x24e0 ctl 0x24d8 bmdma 0x24a8 irq 18
ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 17
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
sata_nv 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 17 (level, low) -> IRQ 17
sata_nv 0000:00:05.2: Using SWNCQ mode
sata_nv 0000:00:05.2: setting latency timer to 64
scsi6 : sata_nv
scsi7 : sata_nv
ata7: SATA max UDMA/133 cmd 0x2800 ctl 0x24f4 bmdma 0x24b0 irq 17
ata8: SATA max UDMA/133 cmd 0x24f8 ctl 0x24f0 bmdma 0x24b8 irq 17
ata2: port disabled. ignoring.
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: WDC WD1200JS-22MHB0, 02.01C03, max UDMA/133
ata4.00: 234441648 sectors, multi 16: LBA48
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD1200JS-22M 02.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
ata6.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 16
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
firewire_ohci 0000:01:05.0: PCI INT A -> Link[LNK1] -> GSI 16 (level, low) -> IRQ 16
firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI version 1.10
dracut: luksOpen /dev/sda2 luks-53976667-9005-4cda-bc91-cda7710f4c05
firewire_core: created device fw0: GUID 00e08100002727f0, S400
padlock: VIA PadLock not detected.
dracut: luksOpen /dev/sdb1 luks-9e6851eb-5c2c-4f97-b7bf-0bf5f490502a
dracut: Scanning devices dm-0 dm-1 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "Home640VG" using metadata type lvm2
dracut: Found volume group "AMDVG" using metadata type lvm2
dracut: 1 logical volume(s) in volume group "Home640VG" now active
dracut: 2 logical volume(s) in volume group "AMDVG" now active
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-3): mounted filesystem with ordered data mode
dracut: Remounting /dev/AMDVG/AMDRoot with -o noatime,ro
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-3): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/AMDVG-AMDRoot
dracut: Loading SELinux policy
type=1404 audit(1136073812.472:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 199310 rules.
SELinux: 2048 avtab hash slots, 199310 rules.
SELinux: 9 users, 13 roles, 3370 types, 160 bools, 1 sens, 1024 cats
SELinux: 77 classes, 199310 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1136073813.134:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 151
microcode: microcode: CPU0: AMD CPU family 0xf not supported
microcode: microcode: CPU1: AMD CPU family 0xf not supported
microcode: microcode: CPU2: AMD CPU family 0xf not supported
microcode: microcode: CPU3: AMD CPU family 0xf not supported
microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
type=1400 audit(1136073816.849:4): avc: denied { mmap_zero } for pid=783 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 11 (level, low) -> IRQ 11
forcedeth 0000:00:08.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
EDAC MC: Ver: 2.1.0 Jul 6 2010
EDAC amd64_edac: Ver: 3.3.0 Jul 6 2010
forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:e0:81:74:02:28
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
i2c i2c-2: nForce2 SMBus adapter at 0x2440
i2c i2c-3: nForce2 SMBus adapter at 0x2400
i2c i2c-4: nForce2 SMBus adapter at 0x3440
i2c i2c-5: nForce2 SMBus adapter at 0x3400
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 10
forcedeth 0000:00:09.0: PCI INT A -> Link[LMA2] -> GSI 10 (level, low) -> IRQ 10
forcedeth 0000:00:09.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:74:02:29
forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:19.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:19.2 failed with error -22
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:06.1: setting latency timer to 64
kvm: Nested Virtualization enabled
EXT3-fs (dm-3): using internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-2): using internal journal
EXT3-fs (dm-2): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-2, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
SELinux: initialized (dev sda1, type ext3), uses xattr
Adding 4358136k swap on /dev/mapper/AMDVG-AMDSwap. Priority:-1 extents:1 across:4358136k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
alloc irq_desc for 54 on node 0
alloc kstat_irqs on node 0
forcedeth 0000:00:08.0: irq 54 for MSI/MSI-X
alloc irq_desc for 55 on node 0
alloc kstat_irqs on node 0
forcedeth 0000:00:09.0: irq 55 for MSI/MSI-X
eth1: no link during initialization.
ADDRCONF(NETDEV_UP): eth1: link is not ready
powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2220 processors (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8
powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa
powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc
powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe
powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10
powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8
powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa
powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc
powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe
powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10
powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
Clocksource tsc unstable (delta = -272992015 ns)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
eth0: no IPv6 routers present
smsc47b397: found SMSC SCH5307-NS (base address 0x0680, revision 0)
Bridge firewalling registered
virbr0: starting userspace STP failed, starting kernel STP
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
[drm] nouveau 0000:06:00.0: Setting dpms mode 1 on tmds encoder (output 2)
SELinux: 2048 avtab hash slots, 200746 rules.
SELinux: 2048 avtab hash slots, 200746 rules.
SELinux: 9 users, 13 roles, 3401 types, 165 bools, 1 sens, 1024 cats
SELinux: 77 classes, 200746 rules
More information about the flashrom
mailing list