[flashrom] [PROPOSAL] support for NIC RTL8139 onboard flashing
Andrew Morgan
ziltro at ziltro.com
Mon May 17 19:20:53 CEST 2010
I would be very interested in this too. I have a few similar 28-pin boot
ROM socketed cards spare and a device I'd like to re-program which uses
28 pin ROM chips.
If there's a problem with the write enable pin, can this be worked
around with another DIL holder with the correct pin bent, and a wire to
connect that pin to the correct voltage?
--
Andrew.
On 16/05/2010 14:01, Guenter wrote:
> Hi all,
> a lot of Realtek RTL8139 NICs have a DIL-32 bootrom socket, and it is
> possible from DOS to flash PXE bootcode directly onboard provided you
> use ATMEL AT29C512 or AT29C010A flashs; here's the download of the
> Realtek flash program (see DOS section):
> http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=6&PFid=6&Level=5&Conn=4&DownTypeID=3&GetDown=false
>
> unfortunately Realtek's flash utility only supports ATMEL flashs, and
> even more worse is the trap that you can only flash the chip if it is
> detected by the BIOS - if you just insert an empty chip then it didnt
> work for me; the chip needs at least the 55AA code at the beginning so
> that its memory is mapped into adapter space by the MB BIOS.
> Do you think that it is possible to add support for flashing these
> cards (omst likely the RTL8169 GB NICs work same) to flashrom?
More information about the flashrom
mailing list