[flashrom] Motherboad supported: Asus P5QL-CM

Денис Юсупов Denissia at yandex.ru
Tue Sep 21 10:24:51 CEST 2010


Hello!

I have Asus P5QL-CM motherboard, and flashrom works just fine. See logs:

server# flashrom -VV -r /mnt/flash/P5QL-CM.oldbios
flashrom v0.9.2-r1001 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719  [FreeBSD]
flashrom is free software, get the source code at http://www.flashrom.org

Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System manufacturer"
DMI string system-product-name: "System Product Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P5QL-CM"
DMI string baseboard-version: "Rev X.0x"
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH10", enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1

Root Complex Register Block address = 0xfed1c000
GCS = 0x1465: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x2008 (HSFS)
FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
0x50: 0x00000202 (FRAP)
BMWAG 0, BMRAG 0, BRWA 2, BRRA 2
0x54: 0x00001fff (FREG0)
0x58: 0x00001fff (FREG1)
0x5C: 0x00001fff (FREG2)
0x60: 0x00001fff (FREG3)
0x64: 0x00001fff (FREG4)
0x74: 0x00000000 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x00414004 (SSFS, SSFC)
0x94: 0x5006     (PREOP)
0x96: 0x463b     (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00000000 (FDOC)
Programming OPCODES...
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: FWH,SPI.
Calibrating delay loop... 2519M loops per second, 10 myus = 12 us, 100 myus = 107 us, 1000 myus = 1016 us, 10000 myus = 10020 us, OK.
Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT25DF021, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF041A, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF081, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF641, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25F512B, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS010, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS040, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF041, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26F004, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB011D, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB021D, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB041D, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A25L40PT, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for AMIC A25L40PU, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Eon EN25B05, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B05T, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B10T, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B20T, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B40T, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B80T, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B16T, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B32T, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B64T, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25D16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F05, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Chip status register is 00
Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000.
Probing for Eon EN25F16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX25L512, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1005, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L2005, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L4005, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L8005, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1605, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3205, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L6405, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L12805, 16384 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Numonyx M25PE10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV010, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV020, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV040, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV512, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for PMC Pm39LV020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for PMC Pm39LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Spansion S25FL008A, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Spansion S25FL016A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF016B, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF032B, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040.REMS, 512 KB: REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF040B, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040B.REMS, 512 KB: REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF080B, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for ST M25P05-A, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P05.RES, 64 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P10.RES, 128 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40-old, 512 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P128, 16384 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W25Q80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25Q16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25Q32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at 0x0
Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at 0x0
Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at 0x0
Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at 0x0
Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at 0x0
Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at 0x0
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at 0x0
Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at 0x0
Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000.
REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13
Not unmapping zero size at 0x0
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Thanks for your help!
===
Reading flash... done.

server# flashrom -Vw /mnt/flash/2/P5QL-ASUS-0615.ROM
flashrom v0.9.2-r1001 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719  [FreeBSD]
flashrom is free software, get the source code at http://www.flashrom.org

Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System manufacturer"
DMI string system-product-name: "System Product Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P5QL-CM"
DMI string baseboard-version: "Rev X.0x"
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH10", enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1

Root Complex Register Block address = 0xfed1c000
GCS = 0x1465: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x2008 (HSFS)
FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
0x50: 0x00000202 (FRAP)
BMWAG 0, BMRAG 0, BRWA 2, BRRA 2
0x54: 0x00001fff (FREG0)
0x58: 0x00001fff (FREG1)
0x5C: 0x00001fff (FREG2)
0x60: 0x00001fff (FREG3)
0x64: 0x00001fff (FREG4)
0x74: 0x00000000 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x007f1004 (SSFS, SSFC)
0x94: 0x5006     (PREOP)
0x96: 0x463b     (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00000000 (FDOC)
Programming OPCODES...
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: FWH,SPI.
Calibrating delay loop... 2519M loops per second, 10 myus = 12 us, 100 myus = 107 us, 1000 myus = 1021 us, 10000 myus = 10020 us, OK.
Probing for AMD Am29F010A/B, 128 KB: skipped.
Probing for AMD Am29F002(N)BB, 256 KB: skipped.
Probing for AMD Am29F002(N)BT, 256 KB: skipped.
Probing for AMD Am29F016D, 2048 KB: skipped.
Probing for AMD Am29F040B, 512 KB: skipped.
Probing for AMD Am29F080B, 1024 KB: skipped.
Probing for AMD Am29LV040B, 512 KB: skipped.
Probing for AMD Am29LV081B, 1024 KB: skipped.
Probing for ASD AE49F2008, 256 KB: skipped.
Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT29C512, 64 KB: skipped.
Probing for Atmel AT29C010A, 128 KB: skipped.
Probing for Atmel AT29C020, 256 KB: skipped.
Probing for Atmel AT29C040A, 512 KB: skipped.
Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT49BV512, 64 KB: skipped.
Probing for Atmel AT49F002(N), 256 KB: skipped.
Probing for Atmel AT49F002(N)T, 256 KB: skipped.
Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for AMIC A29002B, 256 KB: skipped.
Probing for AMIC A29002T, 256 KB: skipped.
Probing for AMIC A29040B, 512 KB: skipped.
Probing for AMIC A49LF040A, 512 KB: skipped.
Probing for EMST F49B002UA, 256 KB: skipped.
Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Chip status register is 00
Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000.
Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN29F010, 128 KB: skipped.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
Probing for Intel 28F001BX-B, 128 KB: skipped.
Probing for Intel 28F001BX-T, 128 KB: skipped.
Probing for Intel 28F004S5, 512 KB: skipped.
Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX29F001B, 128 KB: skipped.
Probing for Macronix MX29F001T, 128 KB: skipped.
Probing for Macronix MX29F002B, 256 KB: skipped.
Probing for Macronix MX29F002T, 256 KB: skipped.
Probing for Macronix MX29LV040, 512 KB: skipped.
Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm29F002T, 256 KB: skipped.
Probing for PMC Pm29F002B, 256 KB: skipped.
Probing for PMC Pm39LV010, 128 KB: skipped.
Probing for PMC Pm39LV020, 256 KB: skipped.
Probing for PMC Pm39LV040, 512 KB: skipped.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST28SF040A, 512 KB: skipped.
Probing for SST SST29EE010, 128 KB: skipped.
Probing for SST SST29LE010, 128 KB: skipped.
Probing for SST SST29EE020A, 256 KB: skipped.
Probing for SST SST29LE020, 256 KB: skipped.
Probing for SST SST39SF512, 64 KB: skipped.
Probing for SST SST39SF010A, 128 KB: skipped.
Probing for SST SST39SF020A, 256 KB: skipped.
Probing for SST SST39SF040, 512 KB: skipped.
Probing for SST SST39VF512, 64 KB: skipped.
Probing for SST SST39VF010, 128 KB: skipped.
Probing for SST SST39VF020, 256 KB: skipped.
Probing for SST SST39VF040, 512 KB: skipped.
Probing for SST SST39VF080, 1024 KB: skipped.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 KB: skipped.
Probing for SST SST49LF020A, 256 KB: skipped.
Probing for SST SST49LF040, 512 KB: skipped.
Probing for SST SST49LF040B, 512 KB: skipped.
Probing for SST SST49LF080A, 1024 KB: skipped.
Probing for SST SST49LF160C, 2048 KB: skipped.
Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M29F002B, 256 KB: skipped.
Probing for ST M29F002T/NT, 256 KB: skipped.
Probing for ST M29F040B, 512 KB: skipped.
Probing for ST M29F400BT, 512 KB: skipped.
Probing for ST M29W010B, 128 KB: skipped.
Probing for ST M29W040B, 512 KB: skipped.
Probing for ST M29W512B, 64 KB: skipped.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: skipped.
Probing for SyncMOS S29C31004T, 512 KB: skipped.
Probing for SyncMOS S29C51001T, 128 KB: skipped.
Probing for SyncMOS S29C51002T, 256 KB: skipped.
Probing for SyncMOS S29C51004T, 512 KB: skipped.
Probing for TI TMS29F002RB, 256 KB: skipped.
Probing for TI TMS29F002RT, 256 KB: skipped.
Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W29C011, 128 KB: skipped.
Probing for Winbond W29C020C, 256 KB: skipped.
Probing for Winbond W29C040P, 512 KB: skipped.
Probing for Winbond W29EE011, 128 KB: skipped.
Probing for Winbond W39V040A, 512 KB: skipped.
Probing for Winbond W39V040B, 512 KB: skipped.
Probing for Winbond W39V040C, 512 KB: skipped.
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: skipped.
Probing for Winbond W49F002U, 256 KB: skipped.
Probing for Winbond W49V002A, 256 KB: skipped.
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x1c, id2 0x13
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Thanks for your help!
===
Flash image seems to be a legacy BIOS. Disabling checks.
Writing flash chip... Erasing flash before programming... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the chipset opcode list.
Invalid OPCODE 0x20
spi_block_erase_20 failed during command execution at address 0x0

Looking at blockwise erase function 1... trying... 0x000000-0x00ffff, 0x010000-0x01ffff, 0x020000-0x02ffff, 0x030000-0x03ffff, 0x040000-0x04ffff, 0x050000-0x05ffff, 0x060000-0x06ffff, 0x070000-0x07ffff, 0x080000-0x08ffff, 0x090000-0x09ffff, 0x0a0000-0x0affff, 0x0b0000-0x0bffff, 0x0c0000-0x0cffff, 0x0d0000-0x0dffff, 0x0e0000-0x0effff, 0x0f0000-0x0fffff,
SUCCESS.
done.
Programming page:

COMPLETE.
Verifying flash... VERIFIED.

flashrom v0.9.2-r1001 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719  [FreeBSD]
flashrom is free software, get the source code at http://www.flashrom.org

Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System manufacturer"
DMI string system-product-name: "System Product Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P5QL-CM"
DMI string baseboard-version: "Rev X.0x"
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH10", enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1

Root Complex Register Block address = 0xfed1c000
GCS = 0x1465: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x2008 (HSFS)
FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
0x50: 0x00000202 (FRAP)
BMWAG 0, BMRAG 0, BRWA 2, BRRA 2
0x54: 0x00001fff (FREG0)
0x58: 0x00001fff (FREG1)
0x5C: 0x00001fff (FREG2)
0x60: 0x00001fff (FREG3)
0x64: 0x00001fff (FREG4)
0x74: 0x00000000 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x007f1004 (SSFS, SSFC)
0x94: 0x5006     (PREOP)
0x96: 0x463b     (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00000000 (FDOC)
Programming OPCODES...
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: FWH,SPI.
Calibrating delay loop... 2519M loops per second, 10 myus = 12 us, 100 myus = 107 us, 1000 myus = 1015 us, 10000 myus = 10021 us, OK.
Probing for AMD Am29F010A/B, 128 KB: skipped.
Probing for AMD Am29F002(N)BB, 256 KB: skipped.
Probing for AMD Am29F002(N)BT, 256 KB: skipped.
Probing for AMD Am29F016D, 2048 KB: skipped.
Probing for AMD Am29F040B, 512 KB: skipped.
Probing for AMD Am29F080B, 1024 KB: skipped.
Probing for AMD Am29LV040B, 512 KB: skipped.
Probing for AMD Am29LV081B, 1024 KB: skipped.
Probing for ASD AE49F2008, 256 KB: skipped.
Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT29C512, 64 KB: skipped.
Probing for Atmel AT29C010A, 128 KB: skipped.
Probing for Atmel AT29C020, 256 KB: skipped.
Probing for Atmel AT29C040A, 512 KB: skipped.
Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT49BV512, 64 KB: skipped.
Probing for Atmel AT49F002(N), 256 KB: skipped.
Probing for Atmel AT49F002(N)T, 256 KB: skipped.
Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for AMIC A29002B, 256 KB: skipped.
Probing for AMIC A29002T, 256 KB: skipped.
Probing for AMIC A29040B, 512 KB: skipped.
Probing for AMIC A49LF040A, 512 KB: skipped.
Probing for EMST F49B002UA, 256 KB: skipped.
Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Chip status register is 00
Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000.
Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN29F010, 128 KB: skipped.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
Probing for Intel 28F001BX-B, 128 KB: skipped.
Probing for Intel 28F001BX-T, 128 KB: skipped.
Probing for Intel 28F004S5, 512 KB: skipped.
Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX29F001B, 128 KB: skipped.
Probing for Macronix MX29F001T, 128 KB: skipped.
Probing for Macronix MX29F002B, 256 KB: skipped.
Probing for Macronix MX29F002T, 256 KB: skipped.
Probing for Macronix MX29LV040, 512 KB: skipped.
Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm29F002T, 256 KB: skipped.
Probing for PMC Pm29F002B, 256 KB: skipped.
Probing for PMC Pm39LV010, 128 KB: skipped.
Probing for PMC Pm39LV020, 256 KB: skipped.
Probing for PMC Pm39LV040, 512 KB: skipped.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST28SF040A, 512 KB: skipped.
Probing for SST SST29EE010, 128 KB: skipped.
Probing for SST SST29LE010, 128 KB: skipped.
Probing for SST SST29EE020A, 256 KB: skipped.
Probing for SST SST29LE020, 256 KB: skipped.
Probing for SST SST39SF512, 64 KB: skipped.
Probing for SST SST39SF010A, 128 KB: skipped.
Probing for SST SST39SF020A, 256 KB: skipped.
Probing for SST SST39SF040, 512 KB: skipped.
Probing for SST SST39VF512, 64 KB: skipped.
Probing for SST SST39VF010, 128 KB: skipped.
Probing for SST SST39VF020, 256 KB: skipped.
Probing for SST SST39VF040, 512 KB: skipped.
Probing for SST SST39VF080, 1024 KB: skipped.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 KB: skipped.
Probing for SST SST49LF020A, 256 KB: skipped.
Probing for SST SST49LF040, 512 KB: skipped.
Probing for SST SST49LF040B, 512 KB: skipped.
Probing for SST SST49LF080A, 1024 KB: skipped.
Probing for SST SST49LF160C, 2048 KB: skipped.
Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M29F002B, 256 KB: skipped.
Probing for ST M29F002T/NT, 256 KB: skipped.
Probing for ST M29F040B, 512 KB: skipped.
Probing for ST M29F400BT, 512 KB: skipped.
Probing for ST M29W010B, 128 KB: skipped.
Probing for ST M29W040B, 512 KB: skipped.
Probing for ST M29W512B, 64 KB: skipped.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: skipped.
Probing for SyncMOS S29C31004T, 512 KB: skipped.
Probing for SyncMOS S29C51001T, 128 KB: skipped.
Probing for SyncMOS S29C51002T, 256 KB: skipped.
Probing for SyncMOS S29C51004T, 512 KB: skipped.
Probing for TI TMS29F002RB, 256 KB: skipped.
Probing for TI TMS29F002RT, 256 KB: skipped.
Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W29C011, 128 KB: skipped.
Probing for Winbond W29C020C, 256 KB: skipped.
Probing for Winbond W29C040P, 512 KB: skipped.
Probing for Winbond W29EE011, 128 KB: skipped.
Probing for Winbond W39V040A, 512 KB: skipped.
Probing for Winbond W39V040B, 512 KB: skipped.
Probing for Winbond W39V040C, 512 KB: skipped.
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: skipped.
Probing for Winbond W49F002U, 256 KB: skipped.
Probing for Winbond W49V002A, 256 KB: skipped.
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x1c, id2 0x13
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Thanks for your help!
===
No operations were specified.
server#

server# pciconf -lbcv
hostb0 at pci0:0:0:0:      class=0x060000 card=0x83361043 chip=0x2e208086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = bridge
    subclass   = HOST-PCI
    cap 09[e0] = vendor (length 12) Intel cap 2 version 1
vgapci0 at pci0:0:2:0:     class=0x030000 card=0x83361043 chip=0x2e228086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = display
    subclass   = VGA
    bar   [10] = type Memory, range 64, base 0xfe400000, size 4194304, enabled
    bar   [18] = type Prefetchable Memory, range 64, base 0xe0000000, size 268435456, enabled
    bar   [20] = type I/O Port, range 32, base 0xcc00, size  8, enabled
    cap 05[90] = MSI supports 1 message
    cap 01[d0] = powerspec 2  supports D0 D3  current D0
    cap 13[a4] = PCI Advanced Features: FLR TP
vgapci1 at pci0:0:2:1:     class=0x038000 card=0x83361043 chip=0x2e238086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = display
    bar   [10] = type Memory, range 64, base 0xfe900000, size 1048576, enabled
    cap 01[d0] = powerspec 2  supports D0 D3  current D0
uhci0 at pci0:0:26:0:      class=0x0c0300 card=0x82d41043 chip=0x3a378086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *4'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xc480, size 32, enabled
    cap 09[50] = vendor (length 6) Intel cap 2 version 0
uhci1 at pci0:0:26:1:      class=0x0c0300 card=0x82d41043 chip=0x3a388086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *5'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xc800, size 32, enabled
    cap 09[50] = vendor (length 6) Intel cap 2 version 0
uhci2 at pci0:0:26:2:      class=0x0c0300 card=0x82d41043 chip=0x3a398086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *6'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xc880, size 32, enabled
    cap 09[50] = vendor (length 6) Intel cap 2 version 0
ehci0 at pci0:0:26:7:      class=0x0c0320 card=0x82d41043 chip=0x3a3c8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB EHCI Controller *2'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xfe8fbc00, size 1024, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 09[98] = vendor (length 6) Intel cap 2 version 0
none0 at pci0:0:27:0:      class=0x040300 card=0x84201043 chip=0x3a3e8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Microsoft UAA Bus Driver for High Definition Audio (Microsoft UAA Bus Driver for High Definition Audio)'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base 0xfe8f4000, size 16384, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 05[60] = MSI supports 1 message, 64 bit
    cap 10[70] = PCI-Express 1 root endpoint max data 128(128) link x0(x0)
pcib1 at pci0:0:28:0:      class=0x060400 card=0x82d41043 chip=0x3a408086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 1'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1)
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x82d41043
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
pcib2 at pci0:0:28:5:      class=0x060400 card=0x82d41043 chip=0x3a4a8086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 6'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x82d41043
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
uhci3 at pci0:0:29:0:      class=0x0c0300 card=0x82d41043 chip=0x3a348086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *1'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xc000, size 32, enabled
    cap 09[50] = vendor (length 6) Intel cap 2 version 0
uhci4 at pci0:0:29:1:      class=0x0c0300 card=0x82d41043 chip=0x3a358086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *2'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xc080, size 32, enabled
    cap 09[50] = vendor (length 6) Intel cap 2 version 0
uhci5 at pci0:0:29:2:      class=0x0c0300 card=0x82d41043 chip=0x3a368086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *3'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xc400, size 32, enabled
    cap 09[50] = vendor (length 6) Intel cap 2 version 0
ehci1 at pci0:0:29:7:      class=0x0c0320 card=0x82d41043 chip=0x3a3a8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB EHCI Controller *1'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xfe8fb800, size 1024, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 09[98] = vendor (length 6) Intel cap 2 version 0
pcib3 at pci0:0:30:0:      class=0x060401 card=0x82d41043 chip=0x244e8086 rev=0x90 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[50] = PCI Bridge card=0x82d41043
isab0 at pci0:0:31:0:      class=0x060100 card=0x82d41043 chip=0x3a188086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
    cap 09[e0] = vendor (length 12) Intel cap 1 version 0
                 features: Quick Resume, SATA RAID-5, 4 PCI-e x1 slots, SATA RAID-0/1/10
atapci0 at pci0:0:31:2:    class=0x010601 card=0x82d41043 chip=0x3a228086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6 port SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
    bar   [10] = type I/O Port, range 32, base 0xb880, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0xb800, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0xb480, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0xb400, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0xb080, size 32, enabled
    bar   [24] = type Memory, range 32, base 0xfe8fa800, size 2048, enabled
    cap 05[80] = MSI supports 16 messages
    cap 01[70] = powerspec 3  supports D0 D3  current D0
    cap 12[a8] = SATA Index-Data Pair
    cap 09[b0] = vendor (length 6) Intel cap 2 version 0
none1 at pci0:0:31:3:      class=0x0c0500 card=0x82d41043 chip=0x3a308086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'SMB controller  (50011458)'
    class      = serial bus
    subclass   = SMBus
    bar   [10] = type Memory, range 64, base 0xfe8fb400, size 256, enabled
    bar   [20] = type I/O Port, range 32, base 0x400, size 32, enabled
re0 at pci0:1:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00
    vendor     = 'Realtek Semiconductor'
    device     = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)'
    class      = network
    subclass   = ethernet
    bar   [10] = type I/O Port, range 32, base 0xd800, size 256, enabled
    bar   [18] = type Prefetchable Memory, range 64, base 0xfdeff000, size 4096, enabled
    bar   [20] = type Prefetchable Memory, range 64, base 0xfdee0000, size 65536, enabled
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[50] = MSI supports 2 messages, 64 bit enabled with 1 message
    cap 10[70] = PCI-Express 1 endpoint IRQ 2 max data 128(256) link x1(x1)
    cap 11[b0] = MSI-X supports 2 messages in map 0x20
    cap 03[d0] = VPD
em0 at pci0:3:0:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
    class      = network
    subclass   = ethernet
    bar   [10] = type Memory, range 32, base 0xfebe0000, size 131072, enabled
    bar   [14] = type Memory, range 32, base 0xfebc0000, size 131072, enabled
    bar   [18] = type I/O Port, range 32, base 0xec00, size 64, enabled
    cap 01[dc] = powerspec 2  supports D0 D3  current D0
    cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction
server#

server# superiotool -deV
superiotool r
Probing for ALi Super I/O at 0x3f0...
  Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
  Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
  Failed. Returned data: vid=0x4400, id=0x23a0
Probing for Fintek Super I/O at 0x4e...
  Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x2e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x2e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x2e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
  Failed. Returned data: id=0xa023, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
Found Winbond W83627DHG (id=0xa0, rev=0x23) at 0x2e
Register dump:
idx 02 20 21 22 23 24 25 26  27 28 29 2a 2b 2c 2d 2e  2f
val ff a0 23 ff 00 44 00 00  ff 50 00 00 00 92 21 00  ff
def 00 a0 NA ff 00 MM 00 MM  RR 50 00 00 RR e2 21 00  00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2  f4 f5
val 00 03 f0 06 02 0e 00 ff  00 00
def 01 03 f0 06 02 8e 00 ff  00 00
LDN 0x01 (Parallel port)
idx 30 60 61 70 74 f0
val 00 03 78 00 04 3c
def 01 03 78 07 04 3f
LDN 0x02 (COM1)
idx 30 60 61 70 f0
val 00 03 f8 04 00
def 01 03 f8 04 00
LDN 0x03 (COM2)
idx 30 60 61 70 f0 f1
val 00 02 f8 03 00 00
def 01 02 f8 03 00 00
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 72 f0
val 01 00 60 00 64 01 0c 83
def 01 00 60 00 64 01 0c 83
LDN 0x06 (Serial peripheral interface)
idx 30 62 63
val 00 ff ff
def 00 00 00
LDN 0x07 (GPIO 6)
idx 30 f4 f5 f6 f7
val 06 ff ff ff ff
def 00 ff 00 00 00
LDN 0x08 (WDTO#, PLED)
idx 30 f5 f6 f7
val 00 ff 00 ff
def 00 00 00 00
LDN 0x09 (GPIO 2, GPIO 3, GPIO 4, GPIO 5)
idx 30 e0 e1 e2 e3 e4 e5 e6  e7 e8 e9 f0 f1 f2 f3 f4  f5 f6 f7 fe
val 0f df 01 00 ff 04 00 00  0c 36 21 f3 04 00 09 16  fe 00 00 00
def 00 ff 00 00 ff 00 00 00  00 00 00 ff 00 00 00 ff  00 00 00 00
LDN 0x0a (ACPI)
idx 30 70 e0 e1 e2 e3 e4 e5  e6 e7 e8 e9 f2 f3 f4 f6  f7 fe
val 01 00 01 00 47 04 20 02  1c 10 09 00 7d 00 00 00  00 00
def 00 00 01 00 ff 08 00 RR  1c 00 RR RR 7c 00 00 00  00 00
LDN 0x0b (Hardware monitor)
idx 30 60 61 70 f0 f1 f2
val 01 02 90 00 81 00 83
def 00 00 00 00 81 00 00
LDN 0x0c (PECI, SST)
idx e0 e1 e2 e3 e4 e5 e8 f1  fe ff
val 10 64 48 48 48 00 01 48  f0 40
def 00 48 48 48 48 00 00 48  00 00
Hardware monitor (0x0295)
Probing for Winbond Super I/O (init=0x88) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
server#



--
WBR, Dennis Yusupoff


More information about the flashrom mailing list