[flashrom] Help: trouble when flashing rom

[Cyrille Bartholomée]

Dear,

I'm facing this problem when flashing my rom:

flashrom v0.9.2-r1028 on Linux 2.6.35-28-generic (i686), built with libpci 3.0.0, GCC 4.4.4, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... delay loop is unreliable, trying to continue OK.
No coreboot table found.
Found chipset "Intel ICH4-M", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000.
Flash image seems to be a legacy BIOS. Disabling checks.
Writing flash chip... Erasing flash chip... ERASE FAILED at 0x00000008! Expected=0xff, Read=0x00, failed byte count from 0x00000000-0x00000fff: 0xfc5
ERASE FAILED!
ERASE FAILED at 0x00000008! Expected=0xff, Read=0x00, failed byte count from 0x00000000-0x0000ffff: 0xfadb
ERASE FAILED!
FAILED!
ERASE FAILED!
FAILED!
Your flash chip is in an unknown state.
Get help on IRC at irc.freenode.net (channel #flashrom) or
mail flashrom at flashrom.org!
-------------------------------------------------------------------------------
DO NOT REBOOT OR POWEROFF!


Regards,

Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen
t. 0032 3 298 4244 | m. 0032 499 711 018 | e. cyrille at bartholomee.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20110418/10435caa/attachment.html>