[flashrom] Supermicro X8DTN-+F

Stefan Tauner stefan.tauner at student.tuwien.ac.at
Wed Jun 1 10:54:57 CEST 2011


On Wed, 01 Jun 2011 10:28:28 +0200
Jimmie Tauriainen <jimmie at southpole.se> wrote:

> 0x04: 0x6008 (HSFS)
> FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
> 0x50: 0x00001a1b (FRAP)
> BMWAG 0x00, BMRAG 0x00, BRWA 0x1a, BRRA 0x1b
> 0x54: 0x00010000 (FREG0: Flash Descriptor)
> 0x00000000-0x00001fff is read-only
> 0x58: 0x03ff0200 (FREG1: BIOS)
> 0x00200000-0x003fffff is read-write
> 0x5C: 0x01ff0002 (FREG2: Management Engine)
> 0x00002000-0x001fffff is locked
> 0x60: 0x00001fff (FREG3: Gigabit Ethernet)
> Gigabit Ethernet region is unused.
> 0x64: 0x00001fff (FREG4: Platform Data)
> Platform Data region is unused.
> […]
> Reading flash... Transaction error!
> Running OPCODE 0x03 failed at address 0x002000 (payload length was 64).

hey there!

wont work, please dont try.
i am working on unlocking this kind of configuration as part of my gsoc
project, but dont hold your breath and use the vendor tool instead
please.

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner




More information about the flashrom mailing list