[flashrom] [PATCH] Fintek SPI driver, based off it87spi

[Carl-Daniel Hailfinger]

Hi Philipp Matthias,

I noticed that you sent this log only to me and not to the mailing list.
That's why I'm fullquoting it now.

An updated patch will follow shortly.

Regards,
Carl-Daniel

Am 23.10.2011 22:05 schrieb Philipp Matthias Hahn:
> Moin Carl-Daniel,
>
> On Sun, Oct 23, 2011 at 01:24:31AM +0200, Carl-Daniel Hailfinger wrote:
>>> The driver had lots of ITE IT87* related code which should have been
>>> removed.
>>> I adapted the code to the current superio interfaces, but in the process
>>> I disabled all flashing completely. Right now I mostly want to check if
>>> detection works or not.
>>>
>>> This code should be safe to run.
>>> Please supply the log of
>>> flashrom -V
>> Next round. This one should print more info, and only one SuperI/O is
>> supported. No flash access at all will happen.
>>
>> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
> # ./flashrom -V
> flashrom v0.9.4-r1455 on Linux 3.0.7 (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian
> flashrom is free software, get the source code at http://www.flashrom.org
>
> Calibrating delay loop... OS timer resolution is 1 usecs, 2552M loops per second, 10 myus = 10 us, 100 myus = 96 us, 1000 myus = 960 us, 10000 myus = 9797 us, 4 myus = 4 us, OK.
> Initializing internal programmer
> No coreboot table found.
> DMI string system-manufacturer: "MSI"
> DMI string system-product-name: "MS-7350"
> DMI string system-version: "1.0"
> DMI string baseboard-manufacturer: "MSI"
> DMI string baseboard-product-name: "MS-7350"
> DMI string baseboard-version: "1.0"
> DMI string chassis-type: "Desktop"
> Found Fintek Super I/O, ID 0x4105.
> Found chipset "NVIDIA MCP51" with PCI ID 10de:0260. Enabling flash write... OK.
> This chipset supports the following protocols: Non-SPI.
> F71882 LPC to serial flash translation enabled
> Serial flash segment 0xfff00000-0xfff7ffff disabled
> Serial flash segment 0xffee0000-0xffefffff enabled
> Serial flash segment 0x000f0000-0x000fffff enabled
> Serial flash segment 0xfff80000-0xffffffff enabled
> Serial flash segment 0x000e0000-0x000effff enabled
> LPC write to serial flash disabled
> SPI_CS_EN is 0
> Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0x05, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0x05, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0x05, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff
> Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff
> Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0x05, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0x05, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0x05, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0x05, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0x05, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x91, id2 0xe3, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff
> Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff
> Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0x05, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip.
> Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x02, id2 0x1e, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> No EEPROM/flash device found.
> Note: flashrom can never write if the flash chip isn't found automatically.
> Restoring PCI config space for 00:0a:0 reg 0x6d
>
> BYtE
> Philipp


-- 
http://www.hailfinger.org/