[flashrom] #7: Using serprog to flash a winbond W25Q16

[flashrom]

#7: Using serprog to flash a winbond W25Q16
--------------------------+----------------------------------
    Reporter:  anonymous  |         Owner:  hailfinger
        Type:  defect     |        Status:  new
    Priority:  major      |     Milestone:  flashrom 0.9.2
   Component:  flashrom   |       Version:  0.9.0
  Resolution:             |      Keywords:  Single byte read
Dependencies:             |  Patch Status:  there is no patch
--------------------------+----------------------------------

Comment (by anonymous):

 Oh I forgot to mention, I'm using some header pins on the motherboard to
 hook up to the arduino, the pins I have plugged in are: Vcc > 3.3v from
 the arduino, Gnd > Gnd,
 Miso > Pin12, Mosi > Pin11, Clock > Pin13, CS > Pin10. Those are the only
 connections coming off the Header pins.
 So to list what I have hooked up:
 Miso
 Mosi
 VCC
 Gnd
 Clock
 CS

 Am I missing something on the chip that I need to plug in?

-- 
Ticket URL: <http://www.flashrom.org/trac/flashrom/ticket/7#comment:1>
flashrom <http://www.flashrom.org/>