[flashrom] [PATCH] Add RDC R6030 chipset
stefan.tauner at student.tuwien.ac.at
Sun Jan 29 10:00:50 CET 2012
On Sun, 29 Jan 2012 00:16:55 +0100
Rudolf Marek <r.marek at assembler.cz> wrote:
> Following patch adds the support for ROMCS_EN for writes aka chipset_enable on
> RDC R6030 found on bifferboard.
> The patch for flashchip will follow in near future.
> Signed-off-by: Rudolf Marek <r.marek at assembler.cz>
thanks rudolf for the patch.
the chipset/soc itself seems to be named R8610 afaics. i could not find
any references to R6030 as a model name. the pci id is 6030h though...
i would suggest changing the R6030 strings to R8610 if i am not
> Index: chipset_enable.c
> --- chipset_enable.c (revision 1485)
> +++ chipset_enable.c (working copy)
> @@ -54,6 +54,17 @@
> return 0;
> +static int enable_flash_rdc(struct pci_dev *dev, const char *name)
please also add a suffix to the function name to indicate the model.
> + uint8_t tmp;
> + tmp = pci_read_byte(dev, 0x43);
> + tmp |= 0x80;
> + pci_write_byte(dev, 0x43, tmp);
> + return 0;
i have verified that this enables write cycles as you said. i am (still)
not familiar with LPC, but there must be a few other things that
are needed to get this chipset to work (at least in non-bifferboard
configurations)(?) and afaics we would also like to check a few other
there is "FRS" which indicates the flash type boot strap, which could
also be X bus. guess X bus does not work transparently, does it?
what about the FRR (flash rom region) registers?
this does not registers a flashrom programmer!?
maybe i am just confused... :)
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
More information about the flashrom