[flashrom] Chips requiring 12 volts on VPP for erase and write

[Daniele Forsi]

Hello,

I have an Intel P28F001 flash memory which flashrom knows as
INTEL_28F001T and lists with .tested = TEST_OK_PR

I can confirm that reading works with -p internal but erasing and
writing don't work because according to its datasheet it needs 12
volts on VPP (min 11.4 max 12.6)

should this fact about 12V VPP recorded somewhere?

the same for the B variant (which I haven't got)

-- 
Daniele Forsi