[flashrom] ft2232_spi:type=jtagkey
Stefan Tauner
stefan.tauner at alumni.tuwien.ac.at
Sun Jun 1 11:55:22 CEST 2014
Hello Alfin,
thanks for your report. Have you connected all input pins of the flash
chip to the programmer? The behavior shown in the log extract could be
coming from a floating write protection pin. That's pin #9 (diagonally
opposite to the pin #1 marker on the 16-pin sop/soic package). I'd
check if that pin is pulled-high towards VCC (pin #2). Likewise all
other *input* pins should be driven - either statically to GND or
VCC (ideally by resistors), or dynamically by the programmer's clock
and data out pins. HTH
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
More information about the flashrom
mailing list