[flashrom] status report (write works!)

[Stefan Tauner]

On Thu, 06 Feb 2014 00:34:21 +0100
Oskar Enoksson <enok at lysator.liu.se> wrote:

> I just wanted to report that all operations (read/erase/write) work fine 
> on SST49LF040.
> 
> I may run an old version, but I saw there is a "?" in the table on your 
> website for "write" on this chip.
> 
> # ../flashrom-0.9.2/flashrom -w build/coreboot.rom
> flashrom v0.9.2-r1001 on Linux 3.4.63-2.44-desktop (x86_64), built with 
> libpci 2.2.3, GCC 4.1.2 20080704 (Red Hat 4.1.2-46)
> flashrom is free software, get the source code at http://www.flashrom.org
> 
> coreboot table found at 0xbffee000.
> Found chipset "AMD AMD8111", enabling flash write... OK.
> This chipset supports the following protocols: Non-SPI.
> Calibrating delay loop... OK.
> Found chip "SST SST49LF040" (512 KB, LPC) at physical address 0xfff80000.
> ===
> This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to flashrom at flashrom.org if any of the above 
> operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V, -Vr,
> -Vw, -VE), and mention which mainboard or programmer you tested.
> Thanks for your help!
> ===
> Writing flash chip... Erasing flash chip... SUCCESS.
> Programming page: DONE!ss: 0x0007f000
> COMPLETE.
> Verifying flash... VERIFIED.


Hello Oskar,

thanks for your report!
I have marked the flash chip as fully tested and will commit that later
together with other small changes.

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner