[flashrom] Supermicro X7DBT board

Tue Jun 2 06:26:22 CEST 2015

Supermicro X7DBT
Vendor product page:
http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT.cfm
Designed to fit 2 in 1U like in a 6015T-TV system:
http://www.supermicro.com/products/system/1U/6015/SYS-6015T-T.cfm

========================================================================
Script started on Tue 02 Jun 2015 04:07:46 AM UTC
root at foo:/tmp/flashrom# ./flashrom -V -p internal:laptop=this_is_not_a_lapto
p -r foo.bin
flashrom v0.9.8-r1890 on Linux 3.2.0-4-amd64 (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.2.1, GCC 4.9.2, little endian
Command line (5 args): ./flashrom -V -p internal:laptop=this_is_not_a_laptop
 -r foo.bin
Calibrating delay loop... OS timer resolution is 1 usecs, 1249M loops per 
second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus 
= 10000 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
Using Internal DMI decoder.
DMI string chassis-type: "Other"
DMI chassis-type is not specific enough.
DMI string system-manufacturer: "Supermicro"
DMI string system-product-name: "X7DBT"
DMI string system-version: "0123456789"
DMI string baseboard-manufacturer: "Supermicro"
DMI string baseboard-product-name: "X7DBT"
DMI string baseboard-version: "PCB Version"
Found Winbond Super I/O, id 0x52
========================================================================
WARNING! You may be running flashrom on an unsupported laptop. We could
not detect this for sure because your vendor has not setup the SMBIOS
tables correctly. You can enforce execution by adding
'-p internal:laptop=this_is_not_a_laptop' to the command line, but
please read the following warning if you are not sure.

Laptops, notebooks and netbooks are difficult to support and we
recommend to use the vendor flashing utility. The embedded controller
(EC) in these machines often interacts badly with flashing.
See the manpage and http://www.flashrom.org/Laptops for details.

If flash is shared with the EC, erase is guaranteed to brick your laptop
and write may brick your laptop.
Read and probe may irritate your EC and cause fan failure, backlight
failure and sudden poweroff.
You have been warned.
========================================================================
Proceeding anyway because user forced us to.
Found chipset "Intel 631xESB/632xESB/3100" with PCI ID 8086:2670.
Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode enabled
0xffe00000/0xffa00000 FWH decode enabled
0xffd80000/0xff980000 FWH decode enabled
0xffd00000/0xff900000 FWH decode enabled
0xffc80000/0xff880000 FWH decode enabled
0xffc00000/0xff800000 FWH decode enabled
0xff700000/0xff300000 FWH decode enabled
0xff600000/0xff200000 FWH decode enabled
0xff500000/0xff100000 FWH decode enabled
0xff400000/0xff000000 FWH decode enabled
Maximum FWH chip size: 0x100000 bytes
SPI Read Configuration: prefetching disabled, caching enabled, 
BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xd3, id2 0x60, id1 
is normal flash content, id2 is normal flash content
Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x4d, id2 0x5a, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0xd3
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0xd3
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x4d, id2 0x5a, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 
0xd3
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 
0xd3
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 
0xd3
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xda, id2 0xd3
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x4d, id2 0x5a, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x4d, id2 0x5a, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x4d, id2 0x5a, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xd3, id2 0x60, id1 is 
normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x4d, id2 0x5a, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 
0xd3
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 
0xd3
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 
0xd3
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 
0xd3
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xda, id2 
0xd3
Found Winbond flash chip "W39V080FA" (1024 kB, FWH) mapped at physical 
address 0x00000000fff00000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Lock status of block at 0x00007ff705448002 is Full Access.
Lock status of block at 0x00007ff705458002 is Full Access.
Lock status of block at 0x00007ff705468002 is Full Access.
Lock status of block at 0x00007ff705478002 is Full Access.
Lock status of block at 0x00007ff705488002 is Full Access.
Lock status of block at 0x00007ff705498002 is Full Access.
Lock status of block at 0x00007ff7054a8002 is Full Access.
Lock status of block at 0x00007ff7054b8002 is Full Access.
Lock status of block at 0x00007ff7054c8002 is Full Access.
Lock status of block at 0x00007ff7054d8002 is Full Access.
Lock status of block at 0x00007ff7054e8002 is Full Access.
Lock status of block at 0x00007ff7054f8002 is Full Access.
Lock status of block at 0x00007ff705508002 is Full Access.
Lock status of block at 0x00007ff705518002 is Full Access.
Lock status of block at 0x00007ff705528002 is Full Access.
Lock status of block at 0x00007ff705538002 is Full Access.
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 
0xda, id2 0xd3
Found Winbond flash chip "W39V080FA" (1024 kB, FWH).
===
This flash part has status UNTESTED for operations: ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above 
operations
work correctly for you with this flash chip. Please include the flashrom log
file for all operations you tested (see the man page for details), and 
mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Reading flash... done.
Restoring PCI config space for 00:1f:0 reg 0xdc
root at foo:/tmp/flashrom# exit
exit

Script done on Tue 02 Jun 2015 04:08:00 AM UTC
========================================================================

I don't have physical access to test ERASE/WRITE (but could with some 
effort).

-- 
Matt Taggart
matt at lackof.org