[flashrom] BX100: there is a Linux tool to flash ROM images through any SATA adapter
Elmar Stellnberger
estellnb at elstel.org
Tue Jan 12 21:48:03 CET 2016
I have just tested this utility:
./msecli -U -i ../opt/frimware/MU02 -m BX100
./msecli -L
did work as expected (flashing the firmware and listing the firmware
status of the device) besides the many other useful options it offers
apart from flashing the firmware (debug-log, secure-erase, ... )
./msecli -D -n /dev/sde ... did print a success message for a clean new
drive from factory but no more information
while (the following command should prepare the drive for removal)
./msecli -Z -n /dev/sde
says:
This command is not supported for the drive.
however it is recognized as BX100 since I get another error message with
non crucial drives.
nice.
Am 2016-01-12 um 18:02 schrieb Luc Verhaegen:
>
> /sbin/msecli is where the magic is, and strings shows that that is
> filled with a load of atapi/smart stuff.
>
> Luc Verhaegen.
>
More information about the flashrom
mailing list