<p>Hi</p>
<p> </p>
<p>  I used the flashrom with SB ICH9R and flash chip SST SST25VF016B, and </p>
<p>the descriptor mode is activated. The software version is flashrom-0.9.1</p>
<p>and pciutils-3.1.4. I failed to flash the BIOS. Please refer to the messages:</p>
<p>===========================</p>
<p>
<p>DiskStation> ./flashrom -E</p>
<p>flashrom v0.9.1-r710</p>
<p>No coreboot table found.</p>
<p>Found chipset "Intel ICH9R", enabling flash write... OK.</p>
<p>This chipset supports the following protocols: LPC,FWH,SPI.</p>
<p>Calibrating delay loop... OK.</p>
<p>Found chip "SST SST25VF016B" (2048 KB, SPI) at physical address 0xffe00000.</p>
<p>Erasing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x001fffff: 0x3000</p>
<p>ERASE FAILED!</p>
<p>FAILED!</p>
<p>ERROR at 0x00000000: Expected=0xff, Read=0x00</p>
<p>Your flash chip is in an unknown state.</p>
<p>Get help on IRC at irc.freenode.net channel #flashrom or</p>
<p>mail flashrom@flashrom.org</p>
<p>------------------------------------------------------------</p>
<p>DO NOT REBOOT OR POWEROFF!</p>
</p>
<p>===========================</p>
<p> </p>
<p>BTW, please find the "flashrom -E -V" messages in the attachment.</p>
<p>Do you know how to solve this problem ? Thanks for your help.</p>
<p> </p>
<p>Eugene</p>
<p> </p>