[root@localhost src]# flashrom -V
flashrom v0.9.1-r710
No coreboot table found.
Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI base address is at 0xfec10000
AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0
PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1
SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=0, DropOneClkOnRd=0
GPIO11 used for SPI_DO
GPIO12 used for SPI_DI
GPIO31 used for SPI_HOLD
GPIO32 used for SPI_CS
GPIO47 used for SPI_CLK
ROM strap override is not active
OK.
This chipset supports the following protocols: LPC,FWH,SPI.
Calibrating delay loop... 737M loops per second, 100 myus = 223 us. OK.
Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT25DF021, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF041A, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF081, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF161, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321A, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF641, 8192 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25F512B, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS010, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS040, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF041, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF081A, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161A, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26F004, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT45CS1282, 16896 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB011D, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB021D, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB041D, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB081D, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB161D, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321C, 4224 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321D, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB642D, 8192 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A25L40P, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=4

The FIFO pointer after skipping is 0.
[1c][31][14][1c]
RDID returned 0x1c 0x31 0x14 0x1c. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x7f5b, id2 0x16, id1 is normal flash content, id2 is normal flash content
Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Eon EN25B05, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B10, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B20, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B40, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B80, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B32, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B64, 8192 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25D16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F05, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F10, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F20, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F40, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F80, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
sb600_spi_send_command, cmd=5, writecnt=0, readcnt=2

The FIFO pointer after skipping is 0.
[00][00]
Chip status register is 00
Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000.
Probing for Eon EN25F16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F32, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x7f, id2 0x16
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Macronix MX25L512, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1005, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L2005, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L4005, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L8005, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1605, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1635D, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3205, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3235D, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L6405, 8192 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L12805, 16384 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Numonyx M25PE10, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE20, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE40, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE80, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV010, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV016B, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV020, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV040, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV080B, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV512, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm29F0002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for PMC Pm29F0002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x7f5b, id2 0x16, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff
Probing for Spansion S25FL016A, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF016B, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF032B, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040B, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040.REMS, 512 KB: sb600_spi_send_command, cmd=90, writecnt=3, readcnt=2
 [0] [0] [0]
[  0][  0][  0]The FIFO pointer after skipping is 3.
[1c][13]
REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF040B.REMS, 512 KB: sb600_spi_send_command, cmd=90, writecnt=3, readcnt=2
 [0] [0] [0]
[  0][  0][  0]The FIFO pointer after skipping is 3.
[1c][13]
REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF080B, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xa9, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x7f5b, id2 0x16, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x7f, id2 0x16
Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x7f5b, id2 0x16, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x7f5b, id2 0x16, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M25P05-A, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P05.RES, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. Probing for ST M25P10-A, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P10.RES, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. Probing for ST M25P20, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40-old, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. Probing for ST M25P80, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P32, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P64, 8192 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P128, 16384 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x7f5b, id2 0x16
Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x7f5b, id2 0x16
Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x7f, id2 0x16
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W25x10, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x20, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x40, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x80, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x7f5b, id2 0x16, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x7f5b, id2 0x16, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x7f, id2 0x16
Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x7f5b, id2 0x16, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xff, id2 0xff
Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0x7f, id2 0x16
Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3

The FIFO pointer after skipping is 0.
[1c][31][14]
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
Please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -rV,
-wV, -EV), and mention which mainboard you tested. Thanks for your help!
===
No operations were specified.
[root@localhost src]#