Hi, thanks for the great tool. Just wanted to let you know that the ASUS m4A79T was compatible.<br><br>When rebooting there was an error "Asus Express Gate - Installation Failed blah". Flashing again with the BIOS setup flasher made it go away. It's not something I'm that interested in anyways: <a href="http://www.brighthub.com/computing/hardware/articles/30617.aspx">http://www.brighthub.com/computing/hardware/articles/30617.aspx</a><br>
<br>Thanks again,<br><br>Mike<br><br>root@mc-desktop:/home/michael# flashrom -w M4A79T-Deluxe-3205.ROM <br>flashrom v0.9.1-r946<br>No coreboot table found.<br>
Found ITE Super I/O, id 8720<br>Found chipset "AMD SB700/SB710/SB750", enabling flash write... OK.<br>
This chipset supports the following protocols: LPC,FWH,SPI.<br>Calibrating delay loop... OK.<br>Found chip "Winbond W25x80" (1024 KB, SPI) at physical address 0xfff00000.<br>===<br>This flash part has status UNTESTED for operations: ERASE<br>
Please email a report to <a href="mailto:flashrom@flashrom.org" target="_blank">flashrom@flashrom.org</a> if any of the above operations<br>work correctly for you with this flash part. Please include the flashrom<br>output with the additional -V option for all operations you tested (-V, -rV,<br>
-wV, -EV), and mention which mainboard or programmer you tested.<br>Thanks for your help!<br>===<br>Flash image seems to be a legacy BIOS. Disabling checks.<br>Writing flash chip... Erasing flash before programming... Erasing flash chip... SUCCESS.<br>
done.<br>Programming flash done.<br>COMPLETE.<br>Verifying flash... VERIFIED. <br>root@mc-desktop:/home/michael# <br><br>=====================================<br><br>root@mc-desktop:/home/michael# flashrom -Vr<br>
flashrom v0.9.1-r946<br>No coreboot table found.<br>DMI string system-manufacturer: "System manufacturer"<br>DMI string system-product-name: "System Product Name"<br>DMI string system-version: "System Version"<br>
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."<br>DMI string baseboard-product-name: "M4A79T Deluxe"<br>DMI string baseboard-version: "Rev 1.xx"<br>DMI string chassis-type: "Desktop"<br>
Found ITE Super I/O, id 8720<br>Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI base address is at 0xfec10000<br>AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0<br>PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1<br>
SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0<br>GPIO11 used for SPI_DO<br>GPIO12 used for SPI_DI<br>GPIO31 used for SPI_HOLD<br>GPIO32 used for SPI_CS<br>
GPIO47 used for SPI_CLK<br>ROM strap override is not active<br>OK.<br>This chipset supports the following protocols: LPC,FWH,SPI.<br>Calibrating delay loop... 811M loops per second, 100 myus = 202 us. OK.<br>Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Atmel AT25DF021, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT25F512B, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT25FS010, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT25FS040, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT26DF041, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT26F004, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for AMIC A25L40PT, 512 KB: RDID returned 0xef 0x30 0x14 0x00. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for AMIC A25L40PU, 512 KB: RDID returned 0xef 0x30 0x14 0x00. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content<br>Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Eon EN25B05, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25B05T, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN25B10, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25B10T, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN25B20, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25B20T, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN25B40, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25B40T, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN25B80, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25B80T, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN25B16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25B16T, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN25B32, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25B32T, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN25B64, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25B64T, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN25D16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25F05, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN25F10, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25F20, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN25F40, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25F80, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN25F16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Eon EN25F32, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Eon EN29F010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Intel 28F004S5, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xf4, id2 0x32<br>Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff<br>Probing for Macronix MX25L512, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Macronix MX25L1005, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Macronix MX25L2005, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Macronix MX25L4005, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Numonyx M25PE10, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Numonyx M25PE20, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Numonyx M25PE40, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for PMC Pm25LV010, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for PMC Pm25LV020, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for PMC Pm25LV040, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for PMC Pm25LV512, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content<br>Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff<br>Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for SST SST25VF016B, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for SST SST25VF032B, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for SST SST25VF040.REMS, 512 KB: REMS returned ef 13. probe_spi_rems: id1 0xef, id2 0x13<br>Probing for SST SST25VF040B, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for SST SST25VF040B.REMS, 512 KB: REMS returned ef 13. probe_spi_rems: id1 0xef, id2 0x13<br>
Probing for SST SST25VF080B, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for SST SST39SF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x97, id2 0x9b, id1 is normal flash content, id2 is normal flash content<br>Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content<br>
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xf4, id2 0x32<br>Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff<br>Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff<br>Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content<br>
Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content<br>Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff<br>Probing for ST M25P05-A, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for ST M25P05.RES, 64 KB: RDID returned 0xef 0x30 0x14. Ignoring RES in favour of RDID.<br>
Probing for ST M25P10-A, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for ST M25P10.RES, 128 KB: RDID returned 0xef 0x30 0x14. Ignoring RES in favour of RDID.<br>Probing for ST M25P20, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for ST M25P40, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for ST M25P40-old, 512 KB: RDID returned 0xef 0x30 0x14. Ignoring RES in favour of RDID.<br>Probing for ST M25P80, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for ST M25P16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for ST M25P32, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for ST M25P64, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for ST M25P128, 16384 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for ST M29W512B, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xf4, id2 0x32<br>Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xf4, id2 0x32<br>Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff<br>Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff<br>
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff<br>Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff<br>Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xf4, id2 0x32<br>Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff<br>
Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff<br>Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Winbond W25x10, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Winbond W25x20, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Winbond W25x40, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Winbond W25x80, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Chip status register is 00<br>Found chip "Winbond W25x80" (1024 KB, SPI) at physical address 0xfff00000.<br>Probing for Winbond W25x16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Winbond W25x32, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Probing for Winbond W25x64, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content<br>Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content<br>
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content<br>Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content<br>
Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.<br>
Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content<br>
Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.<br>RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Not unmapping zero size at (nil)<br>Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.<br>
RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Not unmapping zero size at (nil)<br>Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.<br>
RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Not unmapping zero size at (nil)<br>Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.<br>RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Not unmapping zero size at (nil)<br>
Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.<br>RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Not unmapping zero size at (nil)<br>Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.<br>
RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Not unmapping zero size at (nil)<br>Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.<br>RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>
Not unmapping zero size at (nil)<br>Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000.<br>RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014<br>Not unmapping zero size at (nil)<br>
Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000.<br>REMS returned ef 13. probe_spi_rems: id1 0xef, id2 0x13<br>Not unmapping zero size at (nil)<br>===<br>This flash part has status UNTESTED for operations: ERASE<br>
Please email a report to <a href="mailto:flashrom@flashrom.org" target="_blank">flashrom@flashrom.org</a> if any of the above operations<br>work correctly for you with this flash part. Please include the flashrom<br>output with the additional -V option for all operations you tested (-V, -rV,<br>
-wV, -EV), and mention which mainboard or programmer you tested.<br>Thanks for your help!<br>===<br>Error: No filename specified.<br>root@mc-desktop:/home/michael# <br><br><br>