flashrom v0.9.4-r1395 on Linux 3.0.3-tinycore (i686), built with libpci 2.2.4, GCC 4.2.4 (Ubuntu 4.2.4-1ubuntu4), little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 3 usecs, 304M loops per second, delay more than 10% too short (got 57% of expected delay), recalculating... 546M loops per second, 10 myus = 12 us, 100 myus = 101 us, 1000 myus = 1012 us, 10000 myus = 10010 us, 12 myus = 14 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "MSC Vertriebs GmbH"
DMI string system-product-name: "Q7-US15W CPU Board"
DMI string system-version: "Not Applicable  "
DMI string baseboard-manufacturer: "MSC Vertriebs GmbH"
DMI string baseboard-product-name: "Q7-US15W        "
DMI string baseboard-version: "3.1             "
DMI string chassis-type: "Other"
DMI chassis-type is not specific enough.
Found chipset "Intel SCH Poulsbo" with PCI ID 8086:8119. Enabling flash write... 
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
BIOS Prefetch Enable: enabled, OK.
This chipset supports the following protocols: FWH.
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Found SST flash chip "SST49LF008A" (1024 kB, FWH) at physical address 0xfff00000.
Lock status for 0x000000 (size 0x010000) is 01, write locked
Lock status for 0x010000 (size 0x010000) is 01, write locked
Lock status for 0x020000 (size 0x010000) is 01, write locked
Lock status for 0x030000 (size 0x010000) is 01, write locked
Lock status for 0x040000 (size 0x010000) is 01, write locked
Lock status for 0x050000 (size 0x010000) is 01, write locked
Lock status for 0x060000 (size 0x010000) is 01, write locked
Lock status for 0x070000 (size 0x010000) is 01, write locked
Lock status for 0x080000 (size 0x010000) is 01, write locked
Lock status for 0x090000 (size 0x010000) is 01, write locked
Lock status for 0x0a0000 (size 0x010000) is 01, write locked
Lock status for 0x0b0000 (size 0x010000) is 01, write locked
Lock status for 0x0c0000 (size 0x010000) is 01, write locked
Lock status for 0x0d0000 (size 0x010000) is 01, write locked
Lock status for 0x0e0000 (size 0x010000) is 01, write locked
Lock status for 0x0f0000 (size 0x010000) is 01, write locked
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a
===
This flash part has status UNTESTED for operations: WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
No operations were specified.
Restoring PCI config space for 00:1f:0 reg 0xd9
Restoring PCI config space for 00:1f:0 reg 0xd8