flashrom v0.9.4-r1483 on Linux 3.1.0-3-grml-amd64 (x86_64), built with libpci 3.1.8, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 2 usecs, 902M loops per second, 10 myus = 11 us, 100 myus = 102 us, 1000 myus = 1000 us, 10000 myus = 10000 us, 8 myus = 10 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "AM2NF6G-VSTA" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom@flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Flash bus type is LPC Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0x40000000 Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled. Please send the output of "flashrom -V" to flashrom@flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. The following protocols are supported: LPC. Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Found Winbond flash chip "W39V040B" (512 kB, LPC) at physical address 0xfff80000. Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Found Winbond flash chip "W39V040B" (512 kB, LPC). Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:S, 0x010000-0x01ffff:W, 0x020000-0x02ffff:W, 0x030000-0x03ffff:W, 0x040000-0x04ffff:W, 0x050000-0x05ffff:W, 0x060000-0x06ffff:W, 0x070000-0x07ffff:W Erase/write done. Verifying flash... VERIFIED. Restoring PCI config space for 00:01:0 reg 0x6d Restoring PCI config space for 00:01:0 reg 0x90 Restoring PCI config space for 00:01:0 reg 0x8c Restoring PCI config space for 00:01:0 reg 0x88