flashrom -c W25X80 -w NT35.bin <br>flashrom v0.9.4-r1394 on Linux 3.0.0-16-generic (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian<br>flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a><br>
<br>Calibrating delay loop... OK.<br>Found chipset "NVIDIA MCP61". <br>This chipset is marked as untested. If you are using an up-to-date version<br>of flashrom please email a report to <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a> including a<br>
verbose (-V) log. Thank you!<br>Enabling flash write... This chipset is not really supported yet. Guesswork...<br>SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a>, thanks!<br>
Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544.<br>Please send the output of "flashrom -V" to <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a> with<br>your board name: flashrom -V as the subject to help us finish support for your<br>
chipset. Thanks.<br>OK.<br>This chipset supports the following protocols: SPI.<br>Found Winbond flash chip "W25X80" (1024 kB, SPI) at physical address 0xfff00000.<br>Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.<br>
Reading old flash chip contents... done.<br>Erasing and writing flash chip... Erase/write done.<br>Verifying flash... VERIFY FAILED at 0x00011a00! Expected=0x05, Read=0xff, failed byte count from 0x00000000-0x000fffff: 0x1f8<br>
Your flash chip is in an unknown state.<br>Get help on IRC at <a href="http://irc.freenode.net">irc.freenode.net</a> (channel #flashrom) or<br>mail <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a> with FAILED: your board name in the subject line!<br>
-------------------------------------------------------------------------------<br>DO NOT REBOOT OR POWEROFF!<br><br clear="all"><br>-- <br><p>Serdecznie pozdrawiam</p>
<p>Mariusz Cygan</p>
<p>Specjalista IT / Administrator / Help Desk</p><br>