flashrom v0.9.4-r1457 on Linux 2.6.37.1-1.2-default (i686), built with libpci 3.1.7, GCC 4.5.1 20101208 [gcc-4_5-branch revision 167585], little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 3 usecs, 222M loops per second, delay more than 10% too short (got 59% of expected delay), recalculating... 390M loops per second, 10 myus = 11 us, 100 myus = 99 us, 1000 myus = 1001 us, 10000 myus = 9754 us, 12 myus = 13 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: " "
DMI string baseboard-product-name: "i815-W83627"
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH2" with PCI ID 8086:2440. Enabling flash write... 
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
OK.
This chipset supports the following protocols: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x32
Found Winbond flash chip "W49V002FA" (256 kB, FWH) at physical address 0xfffc0000.
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Found Winbond flash chip "W49V002FA" (256 kB, FWH).
===
This flash part has status UNTESTED for operations: ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
No operations were specified.
Restoring PCI config space for 00:1f:0 reg 0x4e