Hello,<br><br>I try to make the flashrom works using an ponyprog2000 like hardware programmer for SPI EEPROMs. My work add a simple serial programmer, called "pony_spi" and still do not detect right the flash connected to programmer. To note that a modified ponyprog2000 know to read the flash (an W25X40 from an EEEPC701), even it not have right support for erase/write.<br>
<br>Details about that hardware:<br><br><a href="http://www.lancos.com/siprogsch.html">http://www.lancos.com/siprogsch.html</a><br><br>Compared with the original programmer, my programmer have some changes:<br><br>1. There is support for 5 and 3.3 Vcc SPI EEPROMs.<br>
<br>2. CS# pin is not inverted, just limited to 5/3.3V.<br><br>3. MISO pin is inverted by an transistor, to translate MISO from 3.3 to 5V levels.<br><br>All the best,<br>Virgil-Adrian Teaca.<br>