<html><head></head><body><div style="font-family: Verdana;font-size: 12.0px;"><div><br/></div><div># ./flashrom -V<br/></div><div><br/></div><div>flashrom v0.9.5.2-r1515 on Linux 2.6.31.14-0.8-default (x86_64), built with libpci 3.1.3, GCC 4.4.1 [gcc-4_4-branch revision 150839], little endian <br/>flashrom is free software, get the source code at http://www.flashrom.org <br/><br/>Calibrating delay loop... OS timer resolution is 2 usecs, 611M loops per second, 10 myus = 12 us, 100 myus = 93 us, 1000 myus = 914 us, 10000 myus = 9615 us, 8 myus = 57 us, OK. <br/>Initializing internal programmer <br/>No coreboot table found. <br/>DMI string system-manufacturer: "System manufacturer" <br/>DMI string system-product-name: "System Product Name" <br/>DMI string system-version: "System Version" <br/>DMI string baseboard-manufacturer: "ASUSTeK Computer INC." <br/>DMI string baseboard-product-name: "M2N-MX" <br/>DMI string baseboard-version: "Rev 1.xx" <br/>DMI string chassis-type: "Desktop" <br/>Found ITE Super I/O, ID 0x8712 on port 0x2e <br/>Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork... <br/>ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 <br/>Flash bus type is LPC <br/>Found SMBus device 10de:03eb at 00:01:1 <br/>MCP SPI BAR is at 0xfec80000 <br/>Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled. <br/>Please send the output of "flashrom -V" to flashrom@flashrom.org with <br/>your board name: flashrom -V as the subject to help us finish support for your <br/>chipset. Thanks. <br/>OK. <br/>Super I/O ID 0x8712 is not on the list of flash capable controllers. <br/>The following protocols are supported: LPC. <br/>Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 <br/>Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xe1, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br/>Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50<br/>Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50<br/>Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50<br/>Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50<br/>Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50<br/>Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50<br/>Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address 0xfff80000.<br/>Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br/>Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br/>Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br/>Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br/>Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br/>Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br/>Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br/>Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50<br/>Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50<br/>Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50<br/>Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br/>Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50<br/>Found SST flash chip "SST49LF040B" (512 kB, LPC).<br/>No operations were specified.<br/>Restoring PCI config space for 00:01:0 reg 0x6d<br/>Restoring PCI config space for 00:01:0 reg 0x90<br/>Restoring PCI config space for 00:01:0 reg 0x8c<br/>Restoring PCI config space for 00:01:0 reg 0x88<br/></div><div><br/></div></div> <br><br><table cellpadding="0" cellspacing="0" border="0"><tr><td style="font-family:verdana; font-size:12px; line-height:17px;border-top:1px solid #000000">Ihr WEB.DE Postfach immer dabei: die kostenlose WEB.DE Mail App für iPhone und Android. <br><a href="https://produkte.web.de/freemail_mobile_startseite/"><b>https://produkte.web.de/freemail_mobile_startseite/</b></a></td></tr></table>
</body></html>