Hi! But, i'm not flashing yet. I have this error when start:<br><br> >> sudo flashrom -w 946F1P06.BIN --programmer internal<br>flashrom v0.9.6.1-r1564 on Linux 3.5.4-1-ARCH (i686)<br>flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a><br>
--<br>Calibrating delay loop... OK.<br>Found chipset "Intel H55". Enabling flash write... The Flash Descriptor Security Override Strap-Pin is set. Restrictions implied<br>by the FRAP and FREG registers are NOT in effect. Please note that Protected<br>
Range (PR) restrictions still apply.<br>Enabling hardware sequencing due to multiple flash chips detected.<br>OK.<br>Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific) at physical address 0x0.<br>
Error: Image size doesn't match<br>--<br><br>And here internal -V:<br>--<br> >> sudo flashrom --programmer internal -V<br>flashrom v0.9.6.1-r1564 on Linux 3.5.4-1-ARCH (i686)<br>flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a><br>
<br>flashrom was built with libpci 3.1.10, GCC 4.7.1 20120721 (prerelease), little endian<br>Command line (3 args): flashrom --programmer internal -V<br>Calibrating delay loop... OS timer resolution is 1 usecs, 1373M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1021 us, 10000 myus = 9838 us, 4 myus = 4 us, OK.<br>
Initializing internal programmer<br>No coreboot table found.<br>DMI string system-manufacturer: "To Be Filled By O.E.M."<br>DMI string system-product-name: "To Be Filled By O.E.M."<br>DMI string system-version: "To Be Filled By O.E.M."<br>
DMI string baseboard-manufacturer: "Foxconn"<br>DMI string baseboard-product-name: "H55MX-S Series"<br>DMI string baseboard-version: "1.1"<br>DMI string chassis-type: "Desktop"<br>Found ITE Super I/O, ID 0x8720 on port 0x2e<br>
Found chipset "Intel H55" with PCI ID 8086:3b06. Enabling flash write... <br>0xfff80000/0xffb80000 FWH IDSEL: 0x0<br>0xfff00000/0xffb00000 FWH IDSEL: 0x0<br>0xffe80000/0xffa80000 FWH IDSEL: 0x1<br>0xffe00000/0xffa00000 FWH IDSEL: 0x1<br>
0xffd80000/0xff980000 FWH IDSEL: 0x2<br>0xffd00000/0xff900000 FWH IDSEL: 0x2<br>0xffc80000/0xff880000 FWH IDSEL: 0x3<br>0xffc00000/0xff800000 FWH IDSEL: 0x3<br>0xff700000/0xff300000 FWH IDSEL: 0x4<br>0xff600000/0xff200000 FWH IDSEL: 0x5<br>
0xff500000/0xff100000 FWH IDSEL: 0x6<br>0xff400000/0xff000000 FWH IDSEL: 0x7<br>0xfff80000/0xffb80000 FWH decode enabled<br>0xfff00000/0xffb00000 FWH decode enabled<br>0xffe80000/0xffa80000 FWH decode disabled<br>0xffe00000/0xffa00000 FWH decode disabled<br>
0xffd80000/0xff980000 FWH decode disabled<br>0xffd00000/0xff900000 FWH decode disabled<br>0xffc80000/0xff880000 FWH decode disabled<br>0xffc00000/0xff800000 FWH decode disabled<br>0xff700000/0xff300000 FWH decode disabled<br>
0xff600000/0xff200000 FWH decode disabled<br>0xff500000/0xff100000 FWH decode disabled<br>0xff400000/0xff000000 FWH decode disabled<br>Maximum FWH chip size: 0x100000 bytes<br>BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x8<br>
Root Complex Register Block address = 0xfed1c000<br>GCS = 0xc64: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI)<br>Top Swap : not enabled<br>SPIBAR = 0xfed1c000 + 0x3800<br>0x04: 0x4008 (HSFS)<br>HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=0, FDV=1, FLOCKDN=0<br>
The Flash Descriptor Security Override Strap-Pin is set. Restrictions implied<br>by the FRAP and FREG registers are NOT in effect. Please note that Protected<br>Range (PR) restrictions still apply.<br>Programming OPCODES... done<br>
0x06: 0x0000 (HSFC)<br>HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0<br>0x08: 0x00000000 (FADDR)<br>0x50: 0x0000ffff (FRAP)<br>BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff<br>0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write.<br>
0x58: 0x07ff0700 FREG1: BIOS region (0x00700000-0x007fffff) is read-write.<br>0x5C: 0x06ff0001 FREG2: Management Engine region (0x00001000-0x006fffff) is read-write.<br>0x90: 0x00 (SSFS)<br>SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0<br>
0x91: 0xf84200 (SSFC)<br>SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=2, SME=0, SCF=0<br>0x94: 0x5006     (PREOP)<br>0x96: 0x463b     (OPTYPE)<br>0x98: 0x05d80302 (OPMENU)<br>0x9C: 0xc79f0190 (OPMENU+4)<br>0xA0: 0x00000000 (BBAR)<br>
0xC4: 0x00000000 (LVSCC)<br>LVSCC: BES=0x0, WG=0, WSR=0, WEWS=0, EO=0x0, VCL=0<br>0xC8: 0x00002001 (UVSCC)<br>UVSCC: BES=0x1, WG=0, WSR=0, WEWS=0, EO=0x20, VCL=0<br>0xD0: 0x00000000 (FPB)<br><br>Enabling hardware sequencing due to multiple flash chips detected.<br>
SPI Read Configuration: prefetching enabled, caching enabled, OK.<br>No IT87* serial flash segment enabled.<br>The following protocols are supported: FWH, Programmer-specific.<br>Probing for Programmer Opaque flash chip, 0 kB: Found 2 attached SPI flash chips with a combined density of 8192 kB.<br>
There is only one partition containing the whole address space (0x000000 - 0x7fffff).<br>There are 2048 erase blocks with 4096 B each.<br>Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific) at physical address 0x0.<br>
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x7f, id2 0xf1, id1 is normal flash content, id2 is normal flash content<br>
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content<br>
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x7f, id2 0xf1, id1 is normal flash content, id2 is normal flash content<br>
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x7f, id2 0xf1, id1 is normal flash content, id2 is normal flash content<br>Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x7f, id2 0xf1, id1 is normal flash content, id2 is normal flash content<br>
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x7f, id2 0xf1, id1 is normal flash content, id2 is normal flash content<br>Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content<br>
Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific).<br>No operations were specified.<br>Restoring MMIO space at 0xb76e48a0<br>Restoring MMIO space at 0xb76e489c<br>Restoring MMIO space at 0xb76e4898<br>
Restoring MMIO space at 0xb76e4896<br>Restoring MMIO space at 0xb76e4894<br>Restoring PCI config space for 00:1f:0 reg 0xdc<br>--<br><br><div class="gmail_quote">2012/10/1 Stefan Tauner <span dir="ltr"><<a href="mailto:stefan.tauner@student.tuwien.ac.at" target="_blank">stefan.tauner@student.tuwien.ac.at</a>></span><br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hello Vladislav!<br>
<br>
You have visited our IRC channel briefly and mentioned the Foxconn board<br>
together with a short, but interesting snippet of flashrom output. Can<br>
you please send us the complete output of<br>
flashrom --programmer internal -V<br>
(you can use the --output option to log to a file directly).<br>
How did flashing the board worked out for you in the end?<br>
<span class="HOEnZb"><font color="#888888"><br>
--<br>
Kind regards/Mit freundlichen Grüßen, Stefan Tauner<br>
</font></span></blockquote></div><br>