<div dir="ltr"><div><div><div><div>Sorry, I didn't create a log.  If I didn't have to solder wires<br>to my flash chip I'd try to recreate it for you.  My soldering<br></div>"skills" aren't !<br><br>
</div>The best I can do is the following which was still on<br></div>my screen.  Run under Ubuntu 10.04 on a Dell Optiplex 745<br>with a Intel Pentium D CPU 3.40GHz.<br><br></div><div>Code was pulled from svn on 4/16 (rev 1669).<br>
<br></div><div>Skip<br></div><div><br>---<br>skip@lucid:~/flashrom/new$ sudo ../flashrom -p ft2232_spi:type=tumpa,port=B  -w new.bin<br>flashrom v0.9.6.1-r1669 on Linux 2.6.32-37-generic-pae (i686)<br>flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a><br>
<br>Calibrating delay loop... OK.<br>Found Macronix flash chip "MX25L12805(D)" (16384 kB, SPI) on ft2232_spi.<br>===<br>This flash part has status UNTESTED for operations: READ ERASE WRITE<br>The test status of this chip may have been updated in the latest development<br>
version of flashrom. If you are running the latest development version,<br>please email a report to <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a> if any of the above operations<br>work correctly for you with this flash part. Please include the flashrom<br>
output with the additional -V option for all operations you tested (-V, -Vr,<br>-VE, -Vw), and mention which mainboard or programmer you tested.<br>Please mention your board in the subject line. Thanks for your help!<br>Reading old flash chip contents... ftdi_read_data: -19, usb bulk read failed<br>
get_buf failed: 1<br>ftdi_write_data: -19, usb bulk write failed<br>send_buf failed at end: 1<br>FAILED.<br>skip@lucid:~/flashrom/new$ sudo ../flashrom -p ft2232_spi:type=tumpa,port=B  -w new.bin<br>flashrom v0.9.6.1-r1669 on Linux 2.6.32-37-generic-pae (i686)<br>
flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a><br><br>Calibrating delay loop... OK.<br>Found Macronix flash chip "MX25L12805(D)" (16384 kB, SPI) on ft2232_spi.<br>
===<br>This flash part has status UNTESTED for operations: READ ERASE WRITE<br>The test status of this chip may have been updated in the latest development<br>version of flashrom. If you are running the latest development version,<br>
please email a report to <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a> if any of the above operations<br>work correctly for you with this flash part. Please include the flashrom<br>output with the additional -V option for all operations you tested (-V, -Vr,<br>
-VE, -Vw), and mention which mainboard or programmer you tested.<br>Please mention your board in the subject line. Thanks for your help!<br>Reading old flash chip contents... done.<br>Erasing and writing flash chip... Erase/write done.<br>
Verifying flash... VERIFIED.<br>skip@lucid:~/flashrom/new$<br>---<br></div><br></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Mon, Apr 22, 2013 at 2:37 PM, Stefan Tauner <span dir="ltr"><<a href="mailto:stefan.tauner@student.tuwien.ac.at" target="_blank">stefan.tauner@student.tuwien.ac.at</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="HOEnZb"><div class="h5">On Mon, 22 Apr 2013 13:24:44 -0700<br>
Skip WB6YMH <<a href="mailto:wb6ymh@gfrn.org">wb6ymh@gfrn.org</a>> wrote:<br>
<br>
> I'd like to let you know that I successfully programmed the above<br>
> chip using a ft2232 based "TUMPA" interface card.  I've programmed<br>
> two chips on two separate boards, but worked fine and booted<br>
> Linux.<br>
><br>
> I did get one  "get_buf failed: 1<br>
> ftdi_write_data: -19, usb bulk write failed<br>
> send_buf failed at end: 1<br>
> FAILED."<br>
><br>
> Error, but that probably has nothing to do with the MX25L12805(D) chip.<br>
><br>
> Thanks for the code !<br>
><br>
> Skip<br>
<br>
<br>
</div></div>Hello Skip,<br>
<br>
thanks for your report!<br>
I have marked the flash chip as fully tested and will commit that later<br>
together with other small changes.<br>
<br>
Please include the complete log in future reports (and an additional<br>
one with verbose output (-V) if the normal run did not include that).<br>
That's especially interesting for error cases such as the one you<br>
mentioned. Do you remember when the error occurred exactly?<br>
<span class="HOEnZb"><font color="#888888">--<br>
Kind regards/Mit freundlichen Grüßen, Stefan Tauner<br>
</font></span></blockquote></div><br></div>