<div dir="ltr">Hi Stefan,<div><br></div><div>in the meantime I discovered that I had the wires wrong, the Winbond chip doesn't have pin 1 marked</div><div>so it's basically:</div><div><br></div><div>8    7    6    5</div>
<div>----------------</div><div>  winbond </div><div>25Q32BVAIG</div><div>----------------</div><div>1    2    3    4</div><div><br></div><div>With write-protect and hold pins left unconnected I'm getting the following<br>
</div><div><div><br></div><div>Found Winbond flash chip "W25Q32.V" (4096 kB, SPI).</div><div>This chip may contain one-time programmable memory. flashrom cannot read</div><div>and may never be able to write it, hence it may not be able to completely</div>
<div>clone the contents of this chip (see man page for details).</div><div>Reading old flash chip contents... done.</div><div>Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00000fff: 0x8de</div>
<div>ERASE FAILED!</div><div>Reading current flash chip contents... done. Looking for another erase function.</div><div>Trying erase function 1... 0x000000-0x007fff:EFAILED at 0x00000200! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00007fff: 0x446a</div>
<div>ERASE FAILED!</div><div>Reading current flash chip contents... done. Looking for another erase function.</div><div>Trying erase function 2... 0x000000-0x00ffff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0000ffff: 0x8748</div>
<div>ERASE FAILED!</div><div>Reading current flash chip contents... done. Looking for another erase function.</div><div>Trying erase function 3... 0x000000-0x3fffff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x003fffff: 0x21cdcb</div>
<div>ERASE FAILED!</div><div>Reading current flash chip contents... done. Looking for another erase function.</div><div>Trying erase function 4... 0x000000-0x3fffff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x003fffff: 0x219e8d</div>
<div>ERASE FAILED!</div><div>Looking for another erase function.</div><div>No usable erase functions left.</div><div>FAILED!</div><div>Uh oh. Erase/write failed. Checking if anything changed.</div><div>Your flash chip is in an unknown state.</div>
<div>Please report this on IRC at <a href="http://chat.freenode.net">chat.freenode.net</a> (channel #flashrom) or</div><div>mail <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a>, thanks!</div><div>Raw bitbang mode version 1</div>
<div>Bus Pirate shutdown completed.</div></div><div><br></div><div><br></div><div>It seems that both hold and write-protect should be connected to 3.3V</div><div>but I'm not sure how to achieve it with BP 3.6.</div><div>
I'm unable to paste the text describing hold and write-protect</div><div>(datasheet can be found here <a href="http://www.elinux.org/images/f/f5/Winbond-w25q32.pdf">http://www.elinux.org/images/f/f5/Winbond-w25q32.pdf</a> page 8)<br>
</div><div>but essentailly both are active low.</div><div><br></div><div>thanks,</div><div><br></div><div>Marek</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Sun, Jul 28, 2013 at 10:12 PM, Stefan Tauner <span dir="ltr"><<a href="mailto:stefan.tauner@student.tuwien.ac.at" target="_blank">stefan.tauner@student.tuwien.ac.at</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="im">On Sun, 28 Jul 2013 21:45:01 +0200<br>
Marek <<a href="mailto:mlf.conv@gmail.com">mlf.conv@gmail.com</a>> wrote:<br>
<br>
> Hi Stefan,<br>
><br>
> thanks for your response, I checked that webpage but it seems that the<br>
> suggestions apply to chips while they're still "sitting on" motherboards<br>
> where as in my case  the chip is pulled out and connected via Probe kit(no<br>
> modifications).<br>
<br>
</div>They do, but most parts of it do apply as well to directly connected<br>
chips. Also... be sure to connect ALL (input) pins.<br>
<a href="http://flashrom.org/Bus_Pirate" target="_blank">http://flashrom.org/Bus_Pirate</a><br>
<div class="HOEnZb"><div class="h5"><br>
--<br>
Kind regards/Mit freundlichen Grüßen, Stefan Tauner<br>
</div></div></blockquote></div><br></div>