flashrom v0.9.6.1-r1671 on MS-DOS 7 (i686)
flashrom was built with libpci 3.1.5, GCC 4.4.4, little endian
Command line (5 args): c:/flashrom/flashrom.exe -V -o blub.txt -p internal:laptop=this_is_not_a_laptop
Calibrating delay loop... OS timer resolution is 60000 usecs, 596M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, 240000 myus = 220000 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: ""
DMI string system-product-name: ""
DMI string system-version: ""
DMI string baseboard-manufacturer: ""
DMI string baseboard-product-name: ""
DMI string baseboard-version: ""
DMI string chassis-type: ""
DMI chassis-type is not specific enough.
========================================================================
WARNING! You may be running flashrom on an unsupported laptop. We could
not detect this for sure because your vendor has not setup the SMBIOS
tables correctly. You can enforce execution by adding
'-p internal:laptop=this_is_not_a_laptop' to the command line, but
please read the following warning if you are not sure.

Laptops, notebooks and netbooks are difficult to support and we
recommend to use the vendor flashing utility. The embedded controller
(EC) in these machines often interacts badly with flashing.
See the manpage and http://www.flashrom.org/Laptops for details.

If flash is shared with the EC, erase is guaranteed to brick your laptop
and write may brick your laptop.
Read and probe may irritate your EC and cause fan failure, backlight
failure and sudden poweroff.
You have been warned.
========================================================================
Proceeding anyway because user forced us to.
Found chipset "Intel Atom E6xx(T)/Tunnel Creek" with PCI ID 8086:8186. Enabling flash write... 
BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled
BIOS Prefetch Enable: enabled, 
Root Complex Register Block address = 0xfed1c000
SPIBAR = 0xfed1c000 + 0x3020
0x00: 0x8000     (SPIS)
0x02: 0x4090     (SPIC)
0x04: 0x00000000 (SPIA)
0x08: 0x00412500 (SPID0)
0x0c: 0x00000000 (SPID0+4)
0x10: 0x00000000 (SPID1)
0x14: 0x00000000 (SPID1+4)
0x18: 0x00000000 (SPID2)
0x1c: 0x00000000 (SPID2+4)
0x20: 0x00000000 (SPID3)
0x24: 0x00000000 (SPID3+4)
0x28: 0x00000000 (SPID4)
0x2c: 0x00000000 (SPID4+4)
0x30: 0x00000000 (SPID5)
0x34: 0x00000000 (SPID5+4)
0x38: 0x00000000 (SPID6)
0x3c: 0x00000000 (SPID6+4)
0x40: 0x00000000 (SPID7)
0x44: 0x00000000 (SPID7+4)
0x50: 0x00000000 (BBAR)
0x54: 0x0604     (PREOP)
0x56: 0xff92     (OPTYPE)
0x58: 0x0301059f (OPMENU)
0x5c: 0xad20d802 (OPMENU+4)
0x60: 0x00000000 (PBR0)
0x64: 0x00000000 (PBR1)
0x68: 0x00000000 (PBR2)
WARNING: SPI Configuration Lockdown activated.
Reading OPCODES... done
        OP        Type      Pre-OP
op[0]: 0x9f, read  w/  addr, none
op[1]: 0x05, read  w/o addr, none
op[2]: 0x01, write w/o addr, none
op[3]: 0x03, read  w/  addr, none
op[4]: 0x02, write w/  addr, none
op[5]: 0xd8, write w/  addr, none
op[6]: 0x20, write w/  addr, none
op[7]: 0xad, write w/  addr, none
Pre-OP 0: 0x04, Pre-OP 1: 0x06
SPI Read Configuration: prefetching disabled, caching enabled, OK.
The following protocols are supported: Parallel, LPC, FWH, SPI.
Probing for AMIC A25L05PT, 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L05PU, 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L10PT, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L10PU, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L20PT, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L20PU, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L40PT, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L40PU, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L80P, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L16PT, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L16PU, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L512, 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L010, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L020, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L040, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L080, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L016, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25L032, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for AMIC A25LQ032, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25DF021, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25DF041A, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25DF081, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25DF081A, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25DF161, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25DF321, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25DF321A, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25DF641(A), 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25DQ161, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute.
Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute.
Probing for Atmel AT25F512B, 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute.
Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute.
Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute.
Probing for Atmel AT25FS010, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT25FS040, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT26DF041, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT26DF081A, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT26DF161, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT26DF161A, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT26F004, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT45CS1282, 16896 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT45DB011D, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT45DB021D, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT45DB041D, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT45DB081D, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT45DB161D, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT45DB321C, 4224 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT45DB321D, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel AT45DB642D, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ESMT F25L008A, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B05, 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B05T, 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B10, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B10T, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B20, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B20T, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B40, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B40T, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B80, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B80T, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B16, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B16T, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B32, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B32T, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B64, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25B64T, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25F05, 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25F10, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25F20, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25F40, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25F80, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25F16, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25F32, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25F64, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25Q40, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25Q80(A), 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25Q16, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25Q32(A/B), 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25Q64, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25Q128, 16384 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25QH16, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon EN25QH32, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for GigaDevice GD25Q20, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for GigaDevice GD25Q40, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for GigaDevice GD25Q80(B), 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for GigaDevice GD25Q16, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for GigaDevice GD25Q32(B), 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for GigaDevice GD25Q64(B), 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for GigaDevice GD25Q128B, 16384 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for GigaDevice GD25LQ32, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Intel 25F160S33B8, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Intel 25F160S33T8, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Intel 25F320S33B8, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Intel 25F320S33T8, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Intel 25F640S33B8, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Intel 25F640S33T8, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L2005(C), 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L4005(A/C), 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L8005/MX25V8005, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L1605, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L1635D, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L1635E, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L3205(A), 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L3206E, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L3235D, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L6405(D), 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L6445E, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25L12805(D), 16384 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25U1635E, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25U3235E/F, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix MX25U6435E/F, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Numonyx M25PE10, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Numonyx M25PE20, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Numonyx M25PE40, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Numonyx M25PE80, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Numonyx M25PE16, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Numonyx N25Q016, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Numonyx N25Q032..1E, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Numonyx N25Q032..3E, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Numonyx N25Q064..1E, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Numonyx N25Q064..3E, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for PMC Pm25LD256C, 32 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for PMC Pm25LD512(C), 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for PMC Pm25LD010(C), 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for PMC Pm25LD020(C), 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for PMC Pm25LD040(C), 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for PMC Pm25LV512(A), 64 kB: Invalid OPCODE 0xab, will not execute.
Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0xab, will not execute.
Probing for PMC Pm25LV010A, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for PMC Pm25LV020, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for PMC Pm25LV040, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for PMC Pm25LV080B, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for PMC Pm25LV016B, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Sanyo LF25FW203A, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Spansion S25FL004A, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Spansion S25FL008A, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Spansion S25FL016A, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Spansion S25FL032A/P, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Spansion S25FL064A/P, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute.
Probing for SST SST25LF080(A), 1024 kB: Invalid OPCODE 0xab, will not execute.
Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute.
Probing for SST SST25VF016B, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for SST SST25VF032B, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for SST SST25VF064C, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute.
Probing for SST SST25VF040B, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute.
Probing for SST SST25VF080B, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for SST SST25WF512, 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for SST SST25WF010, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for SST SST25WF020, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for SST SST25WF040, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25P05-A, 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25P05, 64 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Invalid OPCODE 0x90, will not execute.
Invalid OPCODE 0xab, will not execute.
Probing for ST M25P10-A, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25P10, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Invalid OPCODE 0x90, will not execute.
Invalid OPCODE 0xab, will not execute.
Probing for ST M25P20, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25P20-old, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Invalid OPCODE 0x90, will not execute.
Invalid OPCODE 0xab, will not execute.
Probing for ST M25P40, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25P40-old, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Invalid OPCODE 0x90, will not execute.
Invalid OPCODE 0xab, will not execute.
Probing for ST M25P80, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25P16, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25P32, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25P64, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25P128, 16384 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25PX16, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25PX32, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST M25PX64, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25Q80, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25Q16, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25Q32, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25Q64, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25Q128, 16384 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25X10, 128 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25X20, 256 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25X40, 512 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25X80, 1024 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25X16, 2048 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25X32, 4096 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond W25X64, 8192 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute.
Receiving SFDP signature failed.
Probing for AMIC unknown AMIC SPI chip, 0 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Atmel unknown Atmel SPI chip, 0 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Eon unknown Eon SPI chip, 0 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Macronix unknown Macronix SPI chip, 0 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for PMC unknown PMC SPI chip, 0 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for SST unknown SST SPI chip, 0 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for ST unknown ST SPI chip, 0 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Sanyo unknown Sanyo SPI chip, 0 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Generic unknown SPI chip (RDID), 0 kB: ich_spi_send_command: Internal command size error for opcode 0x9f, got writecnt=1, want =4
Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute.
Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49(H)F010, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F080, 1024 kB: probe_jedec_common: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F080T, 1024 kB: probe_jedec_common: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ESMT F49B002UA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0xffff, id2 0x00ff
Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x00, id2 0x00
Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x00, id2 0x00
Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x00, id2 0x00
Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x00, id2 0x00
Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip.
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39F010, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39L010, 128 kB: probe_jedec_common: id1 0x8b, id2 0x45, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39L020, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x4b, id2 0xa5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.
Restoring MMIO space at fe91f070
Restoring PCI config space for 00:1f:0 reg 0xd9
Restoring PCI config space for 00:1f:0 reg 0xd8
