<div dir="ltr">Hello,<div><br></div><div style>I have an HP DL165 G7 and I applied the latest BIOS image from HP.</div><div style><br></div><div>root# flashrom -p internal:amd_imc_force=yes -w /var/tmp/2012.07.27.A-O37_0727.ROM -c MX25L3206E</div>
<div><br></div><div>flashrom v0.9.7-r1711 on Linux 2.6.32-358.2.1.el6.x86_64 (x86_64)</div><div>flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a></div><div><br>
</div><div>Calibrating delay loop... OK.</div><div>Found chipset "AMD SB7x0/SB8x0/SB9x0". Enabling flash write... Writes have been disabled for safety reasons because the presence of the IMC</div><div>was detected and it could interfere with accessing flash memory. Flashrom will</div>
<div>try to disable it temporarily but even then this might not be safe:</div><div>when it is reenabled and after a reboot it expects to find working code</div><div>in the flash and it is unpredictable what happens if there is none.</div>
<div><br></div><div>To be safe make sure that there is a working IMC firmware at the right</div><div>location in the image you intend to write and do not attempt to erase.</div><div><br></div><div>You can enforce write support with the amd_imc_force programmer option.</div>
<div>Continuing with write support because the user forced us to!</div><div>OK.</div><div>Found Macronix flash chip "MX25L3206E" (4096 kB, SPI) at physical address 0xffc00000.</div><div>Reading old flash chip contents... done.</div>
<div>Erasing and writing flash chip... Erase/write done.</div><div>Verifying flash... VERIFIED.</div><div style><br></div><div style>However after rebooting the machine once, I'm getting this message:<br></div><div style>
<br></div><div style><div>Detect a Unsame SDRR/Configuration Image in Current BIOS</div><div>BMC SDRR Version : 2.37.0.98      -->      2.33.1.226</div><div>Loading updated SDRR/CONFIGURATION to BMC -- DO NOT POWER OFF</div>
<div>Erasing Sectors  Done!</div><div>Uploading SDRR: 100%</div><div>Uploading Configuration: 100%</div><div>Update SDRR/Configuration Image successfully</div><div>Resetting BMC....</div><div><br></div><div style>The machine reboots itself again, and I see the same message the second time around. It reboots itself again.</div>
<div style><br></div><div style>This time, it can't find my local disk:</div><div style><br></div><div style><div>Reboot and Select proper Boot device</div><div>or Insert Boot Media in selected Boot device and press a key</div>
<div><br></div><div style>I issue a reset, then everything seems to be fine from here.</div><div style><br></div><div style><div>/./-> reset /system1/console1</div><div>System1 reset.</div><div><br></div><div><div>/./-> start /system1/console1</div>
<div>...</div></div><div style>(boots to the OS)</div><div style><br></div><div style><br></div><div style>Is this normal, or is this related to the warning about IMC being detected?</div><div style><br></div><div style><br>
</div></div></div></div></div>