<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote">On Tue, Jan 14, 2014 at 8:23 AM, Cory Henderson <span dir="ltr"><<a href="mailto:dcoryh192@gmail.com" target="_blank">dcoryh192@gmail.com</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-color:rgb(204,204,204);border-left-style:solid;padding-left:1ex"><div dir="ltr">With the chromebook powered on (be careful), and your multimeter in DC 
volt mode, touch one probe to any metallic part of the computer chassis 
or any known ground (could even use the ground pin of the flash), then 
touch the other probe to the /WP pin (there was a datasheet sent out 
before with pictures of all of the different packages and their 
pinouts). If your meter reads 0V then the pin is being pulled down and 
the hardware /WP is being enforced. If it reads 1.8V or something around
 there then it might be a bad chip or something off in flashrom.</div></blockquote><div><br></div><div>Yep, that's exactly right.</div><div><br></div><div>For reference, here is the datasheet link posted earlier: <a href="http://www.winbond-usa.com/hq/enu/ProductAndSales/ProductLines/FlashMemory/SerialFlash/W25Q32DW.htm" target="_blank" style="font-size:13px;font-family:arial,sans-serif">http://www.winbond-usa.com/hq/enu/ProductAndSales/ProductLines/FlashMemory/SerialFlash/W25Q32DW.htm</a> . The chip layout is on page 6--We're using the SOIC 208-mil package. The black dot which indicates pin 1 corresponds with a small dimple on the chip itself (and perhaps a white dot silkscreened on the mainboard PCB).</div>

<div><br></div><div>IIRC this system is using the 1.8V chip, but it could be 3.3V. The procedure Cory outlined is correct, in either case.</div><div><br></div></div>-- <br>David Hendricks (dhendrix)<br>Systems Software Engineer, Google Inc.
</div></div>