<div dir="ltr"><div><div><div><div><div><div>Hi Stefan,<br><br></div>Attached the full logs (excluding dmi). My observation is that:<br></div>1) reading spi flash seems to be good.<br></div>2) erasing spi flash : only first 64kb erases successfully, after that erase reports failure.<br>
</div>3) programming spi flash: only first 64kb programs fine, after that erase reports failure.<br></div><br></div>Thanks & Regards,<br>Rajasekhar<br><div><br></div></div><div class="gmail_extra"><br><br><div class="gmail_quote">
On Wed, Apr 23, 2014 at 2:18 AM, Stefan Tauner <span dir="ltr"><<a href="mailto:stefan.tauner@student.tuwien.ac.at" target="_blank">stefan.tauner@student.tuwien.ac.at</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="HOEnZb"><div class="h5">On Tue, 22 Apr 2014 20:54:04 +0530<br>
Rajasekhar Pulluru <<a href="mailto:pullururajasekhar@gmail.com">pullururajasekhar@gmail.com</a>> wrote:<br>
<br>
> Hi Stefan,<br>
><br>
> Thanks for the response. I have tried adding support for Rangeley following<br>
> the spec. Attached the patch. But, flashrom -E is failing with below error<br>
> messages<br>
><br>
> Pasting only the failure messages:<br>
> ..<br>
> ...<br>
> Erasing and writing flash chip... spi_block_erase_20 failed during command<br>
> execution at address 0x0<br>
> Reading current flash chip contents... done. FAILED at 0x00010000!<br>
> Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0003ffff:<br>
> 0x30000<br>
> ERASE FAILED!<br>
> Reading current flash chip contents... done. spi_chip_erase_60 failed<br>
> during command execution<br>
> Reading current flash chip contents... done. spi_chip_erase_c7 failed<br>
> during command execution<br>
> FAILED!<br>
> Your flash chip is in an unknown state.<br>
> Get help on IRC at <a href="http://chat.freenode.net" target="_blank">chat.freenode.net</a> (channel #flashrom) or<br>
> mail <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a> with the subject "FAILED: <your board name>"!<br>
> -------------------------------------------------------------------------------<br>
> DO NOT REBOOT OR POWEROFF!<br>
<br>
</div></div>Thank you for the patch. The errors alone do not really help, please<br>
post the full (verbose) log (you can redact DMI information if you<br>
want).<br>
<div class="HOEnZb"><div class="h5"><br>
--<br>
Kind regards/Mit freundlichen Grüßen, Stefan Tauner<br>
</div></div></blockquote></div><br></div>