<div dir="ltr">And output from the most recent flashrom version:<div><br></div><div><div>sudo flashrom -p internal -V -c W25X80 -w eu35.17.1.rom </div><div>flashrom v0.9.7-r1854 on Linux 3.13.0-39-generic (x86_64)</div><div>flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a></div><div><br></div><div>flashrom was built with libpci 3.2.1, GCC 4.8.2, little endian</div><div>Command line (7 args): flashrom -p internal -V -c W25X80 -w eu35.17.1.rom</div><div>Calibrating delay loop... OS timer resolution is 1 usecs, 1289M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1002 us, 10000 myus = 10000 us, 4 myus = 5 us, OK.</div><div>Initializing internal programmer</div><div>No coreboot table found.</div><div>Using Internal DMI decoder.</div><div>DMI string chassis-type: "Desktop"</div><div>DMI string system-manufacturer: "Hewlett-Packard"</div><div>DMI string system-product-name: " "</div><div>DMI string system-version: " "</div><div>DMI string baseboard-manufacturer: "PEGATRON CORPORATION"</div><div>DMI string baseboard-product-name: "2A94"</div><div>DMI string baseboard-version: "1.03"</div><div>Found chipset "Intel ICH10" with PCI ID 8086:3a18. Enabling flash write... Root Complex Register Block address = 0xfed1c000</div><div>GCS = 0x461: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x1 (SPI)</div><div>Top Swap: not enabled</div><div>0xfff80000/0xffb80000 FWH IDSEL: 0x0</div><div>0xfff00000/0xffb00000 FWH IDSEL: 0x0</div><div>0xffe80000/0xffa80000 FWH IDSEL: 0x1</div><div>0xffe00000/0xffa00000 FWH IDSEL: 0x1</div><div>0xffd80000/0xff980000 FWH IDSEL: 0x2</div><div>0xffd00000/0xff900000 FWH IDSEL: 0x2</div><div>0xffc80000/0xff880000 FWH IDSEL: 0x3</div><div>0xffc00000/0xff800000 FWH IDSEL: 0x3</div><div>0xff700000/0xff300000 FWH IDSEL: 0x4</div><div>0xff600000/0xff200000 FWH IDSEL: 0x5</div><div>0xff500000/0xff100000 FWH IDSEL: 0x6</div><div>0xff400000/0xff000000 FWH IDSEL: 0x7</div><div>0xfff80000/0xffb80000 FWH decode enabled</div><div>0xfff00000/0xffb00000 FWH decode enabled</div><div>0xffe80000/0xffa80000 FWH decode disabled</div><div>0xffe00000/0xffa00000 FWH decode disabled</div><div>0xffd80000/0xff980000 FWH decode disabled</div><div>0xffd00000/0xff900000 FWH decode disabled</div><div>0xffc80000/0xff880000 FWH decode disabled</div><div>0xffc00000/0xff800000 FWH decode disabled</div><div>0xff700000/0xff300000 FWH decode disabled</div><div>0xff600000/0xff200000 FWH decode disabled</div><div>0xff500000/0xff100000 FWH decode disabled</div><div>0xff400000/0xff000000 FWH decode disabled</div><div>Maximum FWH chip size: 0x100000 bytes</div><div>SPI Read Configuration: prefetching disabled, caching enabled, </div><div>BIOS_CNTL = 0x02: BIOS Lock Enable: enabled, BIOS Write Enable: disabled</div><div>Warning: Setting Bios Control at 0xdc from 0x02 to 0x01 failed.</div><div>New value is 0x02.</div><div>SPIBAR = 0x00007fd97b4b4000 + 0x3800</div><div>0x04: 0xa008 (HSFS)</div><div>HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=0, FLOCKDN=1</div><div>Warning: SPI Configuration Lockdown activated.</div><div>Reading OPCODES... done</div><div>0x90: 0x04 (SSFS)</div><div>SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0</div><div>0x91: 0x007f10 (SSFC)</div><div>SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0</div><div>0x94: 0x0006 (PREOP)</div><div>0x96: 0x543b (OPTYPE)</div><div>0x98: 0x05200302 (OPMENU)</div><div>0x9C: 0x0006019f (OPMENU+4)</div><div>PROBLEMS, continuing anyway</div><div>The following protocols are supported: FWH, SPI.</div><div>Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014</div><div>Found Winbond flash chip "W25X80" (1024 kB, SPI) mapped at physical address 0x00000000fff00000.</div><div>Chip status register is 0x02.</div><div>Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.</div><div>Reading old flash chip contents... done.</div><div>Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:ETransaction error!</div><div>SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0</div><div>SSFC: SCGO=0, ACS=1, SPOP=0, COP=2, DBC=0, SME=0, SCF=0</div><div>Running OPCODE 0x20 failed at address 0x000000 (payload length was 0).</div><div>spi_block_erase_20 failed during command execution at address 0x0</div><div>Reading current flash chip contents... done. Looking for another erase function.</div><div>Trying erase function 1... 0x000000-0x00ffff:EInvalid OPCODE 0xd8, will not execute.</div><div>spi_block_erase_d8 failed during command execution at address 0x0</div><div>Reading current flash chip contents... done. Looking for another erase function.</div><div>Trying erase function 2... 0x000000-0x0fffff:EInvalid OPCODE 0xc7, will not execute.</div><div>spi_chip_erase_c7 failed during command execution</div><div>Looking for another erase function.</div><div>No usable erase functions left.</div><div>FAILED!</div><div>Uh oh. Erase/write failed.Checking if anything has changed.</div><div>Reading current flash chip contents... done.</div><div>Good, writing to the flash chip apparently didn't do anything.</div><div>This means we have to add special support for your board, programmer or flash</div><div>chip. Please report this on IRC at <a href="http://chat.freenode.net">chat.freenode.net</a> (channel #flashrom) or</div><div>mail <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a>, thanks!</div><div>-------------------------------------------------------------------------------</div><div>You may now reboot or simply leave the machine running.</div><div>Restoring PCI config space for 00:1f:0 reg 0xdc</div></div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On 8 November 2014 20:15, Smoluszek <span dir="ltr"><<a href="mailto:smoluszek@gmail.com" target="_blank">smoluszek@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hello,<div><br></div><div>I'm trying to flash BIOS of motherboard PEGATRON IPIEL-LA3 - <a href="http://goo.gl/xh4qVa" target="_blank">http://goo.gl/xh4qVa</a><br></div><div><br></div><div>Done that successfully before, but I must have uploaded a write protected bios last time.</div><div><br></div><div>Output of <span style="color:rgb(0,0,0);white-space:pre-wrap">flashrom -p internal -VVV -c W25X80 can be found here: </span><a href="http://paste.flashrom.org/view.php?id=2686" target="_blank">http://paste.flashrom.org/view.php?id=2686</a></div><div><br></div><div>I've also tried flashing with Raspberyy PI via ROM_RECOVERY header on the motherboard, but managed only to detect and read, but each read gave somewhat different file.<br></div><div><br></div><div>Any hints how can I override BIOS_CNTL?</div><div><br></div><div>Thanks in advance!</div><div>Smoluch</div><div><br></div><div><br></div></div>
</blockquote></div><br></div>