<html><head></head><body><div style="font-family: Verdana;font-size: 12.0px;"><div>Hi,</div>
<div>i just want to confirm that the <span class="mw-headline" id="Olimex_ARM-USB-TINY.2F-H_and_ARM-USB-OCD.2F-H">ARM-USB-OCD (without H suffix) works too so you can check this in the supported devices</span>.</div>
<div>A USB3-SATA controllers flash was bricked but i found another board with the same controller, i desoldered both SPI-Flash chips, read the</div>
<div>good one and flashed the image to the bad one, soldered it back in and now it works just fine. (both are functional again)</div>
<div>i dont have the output here (on another PC) but at least i remember some details:</div>
<div> </div>
<div>(i sudo'ed everything)</div>
<div>command: flashrom -p ft2232_spi:type=arm-usb-ocd -r dumpfile.bin</div>
<div>reading a 64kB flash image from a Pm25LD512 (SPI Flash, SO8)</div>
<div>no Errors reported (at least at the stdio shell output)</div>
<div> </div>
<div>soldered the other flash Chip to flying-lead Adapters to the Connector of the Olimex ARM-USB-OCD</div>
<div> </div>
<div>
<div>command: flashrom -p ft2232_spi:type=arm-usb-ocd -w dumpfile.bin</div>
<div>writing the 64kB flash image to a EN25P05 (SPI Flash, SO8)</div>
<div>no Errors reported</div>
<div> </div>
<div>so 3 things can be checked:</div>
<div>ARM-USB-OCD: works</div>
<div>Pm25LD512 Probe/Read works</div>
<div>EN25P05 Probe/Read/Erase/Write works</div>
<div> </div>
<div>greetings,</div>
<div>skrizi</div>
<div> </div>
</div></div></body></html>