<div dir="ltr"><div><br></div><div>Hello,<br><br></div><div>I have compiled the latest version of flashrom (flashrom v0.9.8-r1887) and <span id="result_box" class="" lang="en"><span class="">hoped to flash my AT25080. But </span></span><span id="result_box" class="" lang="en"><span class="">without suc6.<br><br></span></span></div><div><span id="result_box" class="" lang="en"><span class="">I have connected a new </span></span>AT25080 to a Raspberry Pi and hoped to flash the device with in system programming (ISP) mode. <br><br></div><div>First erasing the device with <b>sudo flashrom -E -V -p linux_spi:dev=/dev/spidev0.0</b><br><br></div><div>No luke :(<br></div><div><br></div><div>snapshot of flashrom below:<br><i>Probing for Generic unknown SPI chip (RDID), 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00<br><b>Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi.</b><br>Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x0, id2 0x0<br><b>Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI).</b><br>===<br>This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE<br>The test status of this chip may have been updated in the latest development<br>version of flashrom. If you are running the latest development version,<br>please email a report to <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a> if any of the above operations<br>work correctly for you with this flash chip. Please include the flashrom log<br>file for all operations you tested (see the man page for details), and mention<br>which mainboard or programmer you tested in the subject line.<br>Thanks for your help!<br>Read is not working on this chip. Aborting.</i><br><br></div><div><span id="result_box" class="" lang="en"><span class="">Any kind of help</span> <span class="">is welcome</span></span>, <span id="result_box" class="" lang="en"><span class="">tips on</span> <span class="">how</span> <span class="">best to</span> <span class="">proceed!<br><br></span></span></div><div><br><span id="result_box" class="" lang="en"><span class="">Thank you very much,<br><br></span></span></div><div><span id="result_box" class="" lang="en"><span class="">Roy<br></span></span></div><div><br><br><br></div><b><span id="result_box" class="" lang="en"><span class="">My</span> <span class="">previous post</span></span></b><div><b>--------------------------------------------------------------------------------<br></b><div class="" lang="x-unicode"><div dir="ltr"><div><div>Hello,<br><br></div>Is there support for the AT25080B device from ATMEL? It is not in the supported device list.<br><br></div><div><a href="http://www.atmel.com/Images/Atmel-5228-SEEPROM-AT25080B-160B-Datasheet.pdf">http://www.atmel.com/Images/Atmel-5228-SEEPROM-AT25080B-160B-Datasheet.pdf</a><br><br></div><div>Need
 to flash the AT25080B which is connected to a 82574L from intel. There 
are two 82574L with two AT25080B on my board. If I read from the first 
AT25080B the data is fine and I can also flash is. But the second one is
 not working at all. <br><br></div><div>I compared/checked the SPI communication of the first one with the second one. This looks the same. S<span>o I thought maybe the second </span>AT25080B is broken. After replacing it, still the same result.<br><br></div><div>I
 hope to get is to work if I could flash is not by the SPI interface of 
the 82574L, but by an in system programming (ISP). Example shown in <a href="http://satxhackers.org/wp/hack-content/uploads/2013/04/rPI_flashrom.pdf">http://satxhackers.org/wp/hack-content/uploads/2013/04/rPI_flashrom.pdf</a><br><br><span id="result_box" class="" lang="en"><span class="">Any kind of help</span> <span class="">is welcome</span></span>.<br><br></div><div>Thanks,<br><br></div><div>Roy<br></div><div><br></div></div>

</div><br><br></div></div>