<div dir="ltr">Hi! <div>I'm Oscar, I'm from Argentina. I am trying to program the SPI Flash mentioned in the subject. The chip is inside an Industral computer which upgrade process failed (OS halted :S). I´m using the AMONTEC Jtagkey programmer and following the instructions on <a href="http://flashrom.org/FT2232SPI_Programmer#Amontec_JTAGkey.2FJTAGkey2.2FJTAGkey-Tiny">http://flashrom.org/FT2232SPI_Programmer#Amontec_JTAGkey.2FJTAGkey2.2FJTAGkey-Tiny</a> </div><div>Unfortunately, I am not able to write the chip (I am 99% sure that it is OK)</div><div><br></div><div>I only get: </div><div><div>iot@iot-MS-7529:~$ flashrom -p ft2232_spi:type=jtagkey -w /home/iot/Escritorio/V2H0ET11.BIN </div><div>flashrom v0.9.6.1-r1563 on Linux 3.13.0-32-generic (i686)</div><div>flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a></div><div><br></div><div>Calibrating delay loop... OK.</div><div>Found PMC flash chip "unknown PMC SPI chip" (0 kB, SPI) on ft2232_spi.</div><div>===</div><div>Does the programmer not support the chip? In that case, is there any way to add that support?</div><div><br></div><div>Hope you can aid me!</div><div>Best Regards</div><div><br></div>-- <br><div class="gmail_signature"><div dir="ltr"><img src="http://192.168.0.10/redimec/imagenes/logo_redimec_solo.jpg" width="200" height="66"><div><div><div>Ing. Oscar Enrique Goñi<br></div><div>Mayor Novoa 845 B7001HVQ</div><div>Tel (+54)(249) 444-2280</div><div>Tandil, BsAs. Argentina</div></div></div></div></div>
</div></div>