<div dir="ltr"><div class="gmail_quote"><br><div dir="ltr"><div>Hi Stefan, thanks for your help!</div><div>I have updated with those packages and now I can recognize the chip.</div><div>However, I have an issue while trying to write the flash, here is the basic output:</div><div><br></div><div>Calibrating delay loop... OK.</div><div>Found PMC flash chip "Pm25LD512(C)" (64 kB, SPI) on ft2232_spi.</div><div>Block protection could not be disabled!</div><div>Reading old flash chip contents... done.</div><div>Erasing and writing flash chip... </div><div><br></div><div>and never progress. Moreover, no signals are present on the PINs</div><div><br></div><div>and this is  a part of the verbose output:</div><div><br></div><div><div>Found PMC flash chip "Pm25LD512(C)" (64 kB, SPI).</div><div>Some block protection in effect, disabling... Block protection could not be disabled!</div><div>Chip status register is 0x20.</div><div>Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set</div><div>Chip status register: Bit 6 is not set</div><div>Chip status register: Bit 5 is set</div><div>Chip status register: Block Protect 2 (BP2) is not set</div><div>Chip status register: Block Protect 1 (BP1) is not set</div><div>Chip status register: Block Protect 0 (BP0) is not set</div><div>Chip status register: Write Enable Latch (WEL) is not set</div><div>Chip status register: Write In Progress (WIP/BUSY) is not set</div><div>Reading old flash chip contents... done.</div><div>Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:E </div></div><div><br></div><div>Do you have any idea of the issue?</div><div><br></div><div>Thanks in advance!</div><span class="HOEnZb"><font color="#888888"><div>Oscar</div></font></span></div><div class="gmail_extra"><div><div class="h5"><br><div class="gmail_quote">2015-07-06 21:44 GMT-03:00 Stefan Tauner <span dir="ltr"><<a href="mailto:stefan.tauner@alumni.tuwien.ac.at" target="_blank">stefan.tauner@alumni.tuwien.ac.at</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span>On Mon, 6 Jul 2015 10:27:32 -0300<br>
Oscar Enrique Goñi <<a href="mailto:ogoni@redimec.com.ar" target="_blank">ogoni@redimec.com.ar</a>> wrote:<br>
<br>
> Hi!<br>
> I'm Oscar, I'm from Argentina. I am trying to program the SPI Flash<br>
> mentioned in the subject. The chip is inside an Industral computer which<br>
> upgrade process failed (OS halted :S). I´m using the AMONTEC Jtagkey<br>
> programmer and following the instructions on<br>
> <a href="http://flashrom.org/FT2232SPI_Programmer#Amontec_JTAGkey.2FJTAGkey2.2FJTAGkey-Tiny" rel="noreferrer" target="_blank">http://flashrom.org/FT2232SPI_Programmer#Amontec_JTAGkey.2FJTAGkey2.2FJTAGkey-Tiny</a><br>
><br>
> Unfortunately, I am not able to write the chip (I am 99% sure that it is OK)<br>
><br>
> I only get:<br>
> iot@iot-MS-7529:~$ flashrom -p ft2232_spi:type=jtagkey -w<br>
> /home/iot/Escritorio/V2H0ET11.BIN<br>
> flashrom v0.9.6.1-r1563 on Linux 3.13.0-32-generic (i686)<br>
> flashrom is free software, get the source code at <a href="http://www.flashrom.org" rel="noreferrer" target="_blank">http://www.flashrom.org</a><br>
><br>
> Calibrating delay loop... OK.<br>
> Found PMC flash chip "unknown PMC SPI chip" (0 kB, SPI) on ft2232_spi.<br>
> ===<br>
> Does the programmer not support the chip? In that case, is there any way to<br>
> add that support?<br>
<br>
</span>Hi,<br>
<br>
please upgrade flashrom. Support for your chip was added later. If I am<br>
correct and you are using Ubuntu, you can use these packages:<br>
<a href="https://launchpad.net/~flashrom-developers/+archive/ubuntu/flashrom-daily" rel="noreferrer" target="_blank">https://launchpad.net/~flashrom-developers/+archive/ubuntu/flashrom-daily</a><br>
<span><font color="#888888"><br>
--<br>
Kind regards/Mit freundlichen Grüßen, Stefan Tauner<br>
</font></span></blockquote></div><br><br clear="all"><div><br></div></div></div><span class="">-- <br><div><div dir="ltr"><img src="http://192.168.0.10/redimec/imagenes/logo_redimec_solo.jpg" width="200" height="66"><div><div><div>Ing. Oscar Enrique Goñi<br></div><div>Mayor Novoa 845 B7001HVQ</div><div>Tel (+54)(249) 444-2280</div><div>Tandil, BsAs. Argentina</div></div></div></div></div>
</span></div>
</div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature"><div dir="ltr"><img src="http://192.168.0.10/redimec/imagenes/logo_redimec_solo.jpg" width="200" height="66"><div><div><div>Ing. Oscar Enrique Goñi<br></div><div>Mayor Novoa 845 B7001HVQ</div><div>Tel (+54)(249) 444-2280</div><div>Tandil, BsAs. Argentina</div></div></div></div></div>
</div>