<div dir="ltr"><div><div>I'm trying to flash a SST49LF080A chip and get an error when flashing, the motherboard is from a HP xw9400 AMD Opteron based system. I'm flashing from a CentOS6.x live image using flashrom 0.9.5.2-r1530. I've also tried a Ubuntu 16 live image with a later version of flashrom and it also fails. <br><br></div>I've tried physically removing all devices(disk/cd) and using minimal RAM in case it is a power issue but it fails the same way. <br><br></div><div>There is a un-populated jumper on the board that write enables the flash boot block and I've soldered that closed. <br><br>Can anyone help? Thanks!</div><div><div><div><div><br><br>[root@livecd bios]# flashrom -w bios402-mac.rom <br>flashrom
v0.9.5.2-r1530 on Linux 2.6.32-358.el6.x86_64 (x86_64), built with
libpci 3.1.4, GCC 4.4.6 20110731 (Red Hat 4.4.6-3), little endian<br>flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a><br><br>Calibrating delay loop... OK.<br>Found chipset "NVIDIA MCP55". Enabling flash write... OK.<br>Disabling flash write protection for board "HP xw9400"... OK.<br>Found SST flash chip "SST49LF080A" (1024 kB, LPC) at physical address 0xfff00000.<br>Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.<br>Reading old flash chip contents... done.<br>Erasing and writing flash chip... writing sector at 0x7ff8222d9800 failed!<br>Reading
current flash chip contents... done. ERASE FAILED at 0x000f0000!
Expected=0xff, Read=0xe9, failed byte count from 0x000f0000-0x000fffff:
0x8ede<br>ERASE FAILED!<br>FAILED!<br>Uh oh. Erase/write failed. Checking if anything changed.<br>Your flash chip is in an unknown state.<br>Get help on IRC at <a href="http://chat.freenode.net">chat.freenode.net</a> (channel #flashrom) or<br>mail <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a> with the subject "FAILED: <your board name>"!<br>-------------------------------------------------------------------------------<br>DO NOT REBOOT OR POWEROFF!<br>#####################################################################<br><br>flashrom -r backup.bin<br>flashrom
v0.9.5.2-r1530 on Linux 2.6.32-358.el6.x86_64 (x86_64), built with
libpci 3.1.4, GCC 4.4.6 20110731 (Red Hat 4.4.6-3), little endian<br>flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a><br><br>Calibrating delay loop... OK.<br>Found chipset "NVIDIA MCP55". Enabling flash write... OK.<br>Disabling flash write protection for board "HP xw9400"... OK.<br>Found SST flash chip "SST49LF080A" (1024 kB, LPC) at physical address 0xfff00000.<br>Reading flash... done.<br>#####################################################################<br><br>[root@livecd ~]# flashrom -V<br>flashrom
v0.9.5.2-r1530 on Linux 2.6.32-358.el6.x86_64 (x86_64), built with
libpci 3.1.4, GCC 4.4.6 20110731 (Red Hat 4.4.6-3), little endian<br>flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a><br><br>Calibrating
delay loop... OS timer resolution is 2 usecs, 925M loops per second, 10
myus = 11 us, 100 myus = 101 us, 1000 myus = 1008 us, 10000 myus =
10013 us, 8 myus = 10 us, OK.<br>Initializing internal programmer<br>No coreboot table found.<br>DMI string system-manufacturer: "Hewlett-Packard"<br>DMI string system-product-name: "HP xw9400 Workstation"<br>DMI string system-version: " "<br>DMI string baseboard-manufacturer: "Hewlett-Packard"<br>DMI string baseboard-product-name: "0A1Ch"<br>DMI string baseboard-version: "E"<br>DMI string chassis-type: "Mini Tower"<br>Found chipset "NVIDIA MCP55" with PCI ID 10de:0364. Enabling flash write... OK.<br>Disabling flash write protection for board "HP xw9400"... OK.<br>The following protocols are supported: Non-SPI.<br>Probing
for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x24, id2 0x50,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common:
id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content,
id2 is normal flash content<br>Probing for AMD Am29F002(N)BT, 256 kB:
probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is
normal flash content, id2 is normal flash content<br>Probing for AMD
Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity
violation, id1 is normal flash content, id2 is normal flash content<br>Probing
for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1
0x32, id2 0x55, id1 is normal flash content, id2 is normal flash content<br>Probing
for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x24, id2 0x50,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1
0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2
is normal flash content<br>Probing for AMD Am29LV002BB, 256 kB:
probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is
normal flash content, id2 is normal flash content<br>Probing for AMD
Am29LV002BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity
violation, id1 is normal flash content, id2 is normal flash content<br>Probing
for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1
0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2
is normal flash content<br>Probing for AMD Am29LV008BB, 1024 kB:
probe_jedec_common: id1 0x32, id2 0x55, id1 is normal flash content, id2
is normal flash content<br>Probing for AMD Am29LV008BT, 1024 kB:
probe_jedec_common: id1 0x32, id2 0x55, id1 is normal flash content, id2
is normal flash content<br>Probing for AMD Am29LV040B, 512 kB:
probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is
normal flash content, id2 is normal flash content<br>Probing for AMD
Am29LV081B, 1024 kB: probe_jedec_common: id1 0x32, id2 0x55, id1 is
normal flash content, id2 is normal flash content<br>Probing for AMIC
A29002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity
violation, id1 is normal flash content, id2 is normal flash content<br>Probing
for AMIC A29002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xd3, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1
0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2
is normal flash content<br>Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing
for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xd3, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing
for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x24, id2 0x50, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common:
id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content,
id2 is normal flash content<br>Probing for Eon EN29F002(A)(N)T, 256 kB:
probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is
normal flash content, id2 is normal flash content<br>Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0xffff, id2 0x00ff<br>Probing
for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content<br>Probing for Fujitsu MBM29F004TC, 512 kB:
probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is
normal flash content, id2 is normal flash content<br>Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff<br>Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff<br>Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing
for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing
for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0xff, id2
0xd3, id1 parity violation, id1 is normal flash content, id2 is normal
flash content<br>Probing for Intel 28F008S3/S5/SC, 512 kB:
probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal
flash content, id2 is normal flash content<br>Probing for Intel
28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab:
id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content,
id2 is normal flash content<br>Probing for Intel 28F400BV/BX/CE/CV-B,
512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is
normal flash content, id2 is normal flash content<br>Probing for Intel
28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content<br>Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x32, id2 0x55, id1 is normal flash content, id2 is normal flash content<br>Probing
for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x24, id2 0x50,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for Macronix MX29F001T, 128 kB: probe_jedec_common:
id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content,
id2 is normal flash content<br>Probing for Macronix MX29F002(N)B, 256
kB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is
normal flash content, id2 is normal flash content<br>Probing for
Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xd3,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for Macronix MX29F040, 512 kB: probe_jedec_common:
id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content,
id2 is normal flash content<br>Probing for Macronix MX29LV040, 512 kB:
probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is
normal flash content, id2 is normal flash content<br>Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing
for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information,
using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2
is normal flash content<br>Probing for PMC Pm39LV010, 128 kB:
probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is
normal flash content, id2 is normal flash content<br>Probing for PMC
Pm39LV020, 256 kB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity
violation, id1 is normal flash content, id2 is normal flash content<br>Probing
for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing
for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0x32, id2
0x55, id1 is normal flash content, id2 is normal flash content<br>Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x32, id2 0x55, id1 is normal flash content, id2 is normal flash content<br>Probing
for SST SST28SF040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing
for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing
for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x32, id2 0x55, id1 is
normal flash content, id2 is normal flash content<br>Probing for SST
SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity
violation, id1 is normal flash content, id2 is normal flash content<br>Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing
for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2
0x5b<br>Found SST flash chip "SST49LF080A" (1024 kB, LPC) at physical address 0xfff00000.<br>Probing
for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for ST M29F002B, 256 kB: probe_jedec_common: id1
0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2
is normal flash content<br>Probing for ST M29F002T/NT, 256 kB:
probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is
normal flash content, id2 is normal flash content<br>Probing for ST
M29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity
violation, id1 is normal flash content, id2 is normal flash content<br>Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff<br>Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff<br>Probing
for ST M29W010B, 128 kB: probe_jedec_common: id1 0x24, id2 0x50, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for ST M29W040B, 512 kB: probe_jedec_common: id1
0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2
is normal flash content<br>Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xe9, id2 0x6d, id1 is normal flash content, id2 is normal flash content<br>Probing
for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content<br>Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x32, id2 0x55, id1 is normal flash content, id2 is normal flash content<br>Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x32, id2 0x55, id1 is normal flash content, id2 is normal flash content<br>Probing
for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xd3, id1 parity
violation, id1 is normal flash content, id2 is normal flash content<br>Probing
for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity
violation, id1 is normal flash content, id2 is normal flash content<br>Probing
for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity
violation, id1 is normal flash content, id2 is normal flash content<br>Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x32, id2 0x55, id1 is normal flash content, id2 is normal flash content<br>Probing
for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing
for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0xff, id2 0xd3, id1
parity violation, id1 is normal flash content, id2 is normal flash
content<br>Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1
0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2
is normal flash content<br>Probing for Winbond
W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29*
probe method disabled because the probing sequence puts the AMIC
A49LF040A in a funky state. Use 'flashrom -c
W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such
a chip.<br>Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xbf, id2 0x5b<br>Found SST flash chip "SST49LF080A" (1024 kB, LPC).<br>No operations were specified.<br>Restoring PCI config space for 00:01:0 reg 0x6d<br>Restoring PCI config space for 00:01:0 reg 0x90<br>Restoring PCI config space for 00:01:0 reg 0x8c<br>Restoring PCI config space for 00:01:0 reg 0x88<br></div></div></div></div></div>