source: trunk/nic3com.c @ 1474

/*
 * This file is part of the flashrom project.
 *
 * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

#if defined(__i386__) || defined(__x86_64__)

#include <stdlib.h>
#include "flash.h"
#include "programmer.h"

#define BIOS_ROM_ADDR           0x04
#define BIOS_ROM_DATA           0x08
#define INT_STATUS              0x0e
#define INTERNAL_CONFIG         0x00
#define SELECT_REG_WINDOW       0x800

#define PCI_VENDOR_ID_3COM      0x10b7

static uint32_t internal_conf;
static uint16_t id;

const struct pcidev_status nics_3com[] = {
        /* 3C90xB */
        {0x10b7, 0x9055, OK, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX"},
        {0x10b7, 0x9001, NT, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-T4" },
        {0x10b7, 0x9004, OK, "3COM", "3C90xB: PCI 10BASE-T (TPO)" },
        {0x10b7, 0x9005, NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2/AUI (COMBO)" },
        {0x10b7, 0x9006, NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2 (TPC)" },
        {0x10b7, 0x900a, NT, "3COM", "3C90xB: PCI 10BASE-FL" },
        {0x10b7, 0x905a, NT, "3COM", "3C90xB: PCI 10BASE-FX" },
        {0x10b7, 0x9058, OK, "3COM", "3C905B: Cyclone 10/100/BNC" },

        /* 3C905C */
        {0x10b7, 0x9200, OK, "3COM", "3C905C: EtherLink 10/100 PCI (TX)" },

        /* 3C980C */
        {0x10b7, 0x9805, NT, "3COM", "3C980C: EtherLink Server 10/100 PCI (TX)" },

        {},
};

static void nic3com_chip_writeb(const struct flashctx *flash, uint8_t val,
                                chipaddr addr);
static uint8_t nic3com_chip_readb(const struct flashctx *flash,
                                  const chipaddr addr);
static const struct par_programmer par_programmer_nic3com = {
                .chip_readb             = nic3com_chip_readb,
                .chip_readw             = fallback_chip_readw,
                .chip_readl             = fallback_chip_readl,
                .chip_readn             = fallback_chip_readn,
                .chip_writeb            = nic3com_chip_writeb,
                .chip_writew            = fallback_chip_writew,
                .chip_writel            = fallback_chip_writel,
                .chip_writen            = fallback_chip_writen,
};

static int nic3com_shutdown(void *data)
{
        /* 3COM 3C90xB cards need a special fixup. */
        if (id == 0x9055 || id == 0x9001 || id == 0x9004 || id == 0x9005
            || id == 0x9006 || id == 0x900a || id == 0x905a || id == 0x9058) {
                /* Select register window 3 and restore the receiver status. */
                OUTW(SELECT_REG_WINDOW + 3, io_base_addr + INT_STATUS);
                OUTL(internal_conf, io_base_addr + INTERNAL_CONFIG);
        }

        pci_cleanup(pacc);
        release_io_perms();
        return 0;
}

int nic3com_init(void)
{
        get_io_perms();

        io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_3com);

        id = pcidev_dev->device_id;

        /* 3COM 3C90xB cards need a special fixup. */
        if (id == 0x9055 || id == 0x9001 || id == 0x9004 || id == 0x9005
            || id == 0x9006 || id == 0x900a || id == 0x905a || id == 0x9058) {
                /* Select register window 3 and save the receiver status. */
                OUTW(SELECT_REG_WINDOW + 3, io_base_addr + INT_STATUS);
                internal_conf = INL(io_base_addr + INTERNAL_CONFIG);

                /* Set receiver type to MII for full BIOS ROM access. */
                OUTL((internal_conf & 0xf00fffff) | 0x00600000, io_base_addr);
        }

        /*
         * The lowest 16 bytes of the I/O mapped register space of (most) 3COM
         * cards form a 'register window' into one of multiple (usually 8)
         * register banks. For 3C90xB/3C90xC we need register window/bank 0.
         */
        OUTW(SELECT_REG_WINDOW + 0, io_base_addr + INT_STATUS);

        if (register_shutdown(nic3com_shutdown, NULL))
                return 1;

        max_rom_decode.parallel = 128 * 1024;
        register_par_programmer(&par_programmer_nic3com, BUS_PARALLEL);

        return 0;
}

static void nic3com_chip_writeb(const struct flashctx *flash, uint8_t val,
                                chipaddr addr)
{
        OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR);
        OUTB(val, io_base_addr + BIOS_ROM_DATA);
}

static uint8_t nic3com_chip_readb(const struct flashctx *flash,
                                  const chipaddr addr)
{
        OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR);
        return INB(io_base_addr + BIOS_ROM_DATA);
}

#else
#error PCI port I/O access is not supported on this architecture yet.
#endif