=============== v1.7 (Feb 2026) =============== This document describes the major changes in flashrom version v1.7.0. The work was done during 7 months since previous release in July 2025. We have 30 authors and 90+ commits, thank you everyone! Download ======== flashrom v1.7 can be downloaded in the following ways: Anonymous checkout from the git repository at https://review.coreboot.org/flashrom.git (tag v1.7.0) A tarball is available for download at (signature ) fingerprint: Bugs fixed ========== * AMD-based PCs with FCH were unable to read flash contents for internal (BIOS flash) chips larger than 16 MB, and attempting to do so could crash the system. https://ticket.coreboot.org/issues/370 * Erasing generic SFDP chips was unreliable or could crash if the SFDP erase definitions were not in ascending order of sector sizes. Eraseblocks definition detected from SFDP header are now sorted in ascending order before proceeding further. See https://review.coreboot.org/c/flashrom/+/90131 To complete the bug fix, few more things are also added: * selfcheck function now runs over a chip definition that was constructed from the SFDP header. This way we assert that definition is valid before starting any further operations with the chip. * Basic tests are added for sfdp probing flow. * Using ``--progress`` option together with ``--fmap*`` options was overflooding the terminal with redundant messages. https://ticket.coreboot.org/issues/616 Added support ============= * AT45DB641E (with added EDI detection) * Intel Wildcat Lake chipset * Arrow Lake-H * EN25QX128A * MT25QU02G, MT25QL02G marked as tested * MT35XU02G * MX25U12873F * MX25R512F * MX25R1035F * MX25U12873F * MX66U1G45G * MX66L2G45G * P25D80H * S25FL116K/S25FL216K marked as tested * W35T02NW * W35T02NW * W25Q512JV_M * W25Q80_V * W25R256JW * W77Q{16,32}JW * W77Q{64,128}JW * W77Q{64,128}JV * W77Q{64,128}NW [#b1]_ * W77T{64,128}NW [#b1]_ * W77Q{25,51,10}NW [#b1]_ * W77T{25,51,10}NW [#b1]_ * XM25QU64C/XM25LU64C write-protect support .. [#b1] | Will also be updated later when multi-die support added New features ============ Fail immediately when trying to write/erase wp regions ------------------------------------------------------ One more check has been added before performing erase/write operations. It aborts writing to flash if any of the requested regions are write-protected by chip, dynamically by a chipset, or are defined as read-only. A new message is now printed for the user to explain what happened, example:: can_change_target_regions: cannot fully update part1 region (00000000..0x04ffff) due to chip's write-protection. At least one target region is not fully writable. Aborting. Error: some of the required checks to prepare flash access failed. Earlier messages should give more details. Erase operation has not started. For write, the last line would be ``Write operation has not started.`` This change is done so it's harder for user to brick his own platform. Information about read-only regions can easily be missed as flashrom can output a lot of information on screen. Even if you notice you might not know if one of the regions you requested falls inside read-only range, especially if using different names for those regions. If you are flashing multiple regions or ones that partially overlap with read-only parts then that could result in flashrom failing in the middle, leaving you in unknown state. FMAP verification support -------------------------- A new ``--fmap-verify`` option has been added that allows verification of FMAP (Flash Map) layout compatibility before performing write operations. This option reads the FMAP layout from both the flash ROM and the file to be written, then compares them to ensure they match before proceeding with the write. This is particularly useful when updating specific regions (e.g., COREBOOT) to prevent accidentally writing a ROM image with an incompatible layout that could result in a bricked system. The ``--fmap-verify`` option is mutually exclusive with ``--fmap``, ``--fmap-file``, ``--layout``, and ``--ifd`` options, and can only be used with write operations (``-w``). Example usage:: flashrom -p programmer --fmap-verify -w newimage.rom --image COREBOOT If the FMAP layouts don't match, the operation will abort with a detailed error message showing which regions differ. Erase now respects --noverify option ------------------------------------- The option ``--noverify`` is now respected during erase operation, and verification is not performed if the option is set. Corresponding libflashrom flag is ``FLASHROM_FLAG_VERIFY_AFTER_WRITE``. Default behaviour stays the same, by default verification is performed. Previously, erase operation ignored ``--noverify`` option and always performed verification. For more details, see https://ticket.coreboot.org/issues/520 Note there are still some remaining cases for non-spi chips, when ``--noverify`` is ignored, more details and disussion is here: https://ticket.coreboot.org/issues/605 Programmers updates =================== * New programmer: Nvidia System Management Agent System Management Agent (SMA) programmer is a SoC which is working as a side band management on Nvidia server board. One of its functions is to flash firmware to other components. * asm106x: Added device ID for IDE mode Some boards are configured as IDE controller (class 0x0101); others even have a physical switch to select between IDE and AHCI. For IDE the device ID is 0x0611. * Move all programmers into their own folder Closes https://ticket.coreboot.org/issues/603. libflashrom =========== The real life usage of ``flashrom_flash_probe_v2`` discovered the issue, the error messages as below:: error: variable 'flashctx' has initializer but incomplete type error: storage size of 'flashctx' isn't known New API method ``flashrom_create_context`` is created to fix this. ``flashrom_create_context`` does create and all initialisations needed for flash context. It need to be called prior to any other API calls that require flash context. The issue was a good motivation to write a new test which is built and runs as an external client of libflashrom. The test runs in a separate test executable to achieve this. As a bonus, test code in ``tests/external_client.c`` is an example how to use libflashrom API. SPDX tags for license and copyright =================================== From now on, flashrom is using SPDX tags in source files to indicate license and copyright information. Specifically ``SPDX-License-Identifier`` tag is used for license info, and ``SPDX-FileCopyrightText`` tag is used for copyright info. Existing source files in the tree have been converted to use SPDX tags. New files should be created with SPDX tags. For examples, look at any source file in the tree. Note that source files in directory ``subprojects/packagefiles/cmocka-1.1.5`` haven't been changed, and won't be. Those files are unpacked from cmocka wrap, so that's the exact copy from another project, and should stay as is. Misc updates ============ * tests: Add tests which run a chain of operations * cli_classic.c: Print runtime measurement in seconds in debug * Add guard for compare_region_with_dump() * build: only add git describe for git checkouts * pcidev.h: Extract pcidev declarations to a separate header * doc: Add page to publish license info on the website * sb600spi: Check if SPI BAR register has valid value * spi.h: Move SPI declarations from chipdrivers.h to spi.h * parallel.h: Extract parallel declarations to a separate header * doc: Disable auto-conversion of -- to en-dash on html pages * serial.h: Extract serial declarations to a separate header * helpers_fileio.c: fix fsync() check (fix compilation issue for Android) * flashchips: Add Spansion S25FL512S: pretty print status register 2 * pcidev: support programmers that don't need the ROM BAR and use config space registers * tests/spidriver.c: Fix Windows compilation (see also https://ticket.coreboot.org/issues/602) * Serial: Fix Windows compilation error (missing header) * doc: Update Windows building instructions * flashchips: spansion: Add missing FEATURE_WRSR_EXT2 * platform/udelay: Document file and functions * include/platform.h: Add documentation * meson: Add a static versioning option * dmi.h: Extract DMI declarations to a separate header * platform/endian: Rename memaccess file to be more consistent * tests/probe_spi: Add more detailed tests for probing functions (probe_spi_rdid, probe_spi_res1)