Difference between revisions of "DOS"

From flashrom
Jump to navigation Jump to search
(Remove Prebuilt-Binary section for now (there are no binaries atm))
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
= HOWTO: Using precompiled binaries =
Howto use flashrom with FreeDOS instead of Linux (because of half broken bios or any other reasons):
# Get a USB memory drive with at least 1GB of memory available (or any other memory device you can boot from)
# Download FreeDOS Image form http://downloads.joelinoff.com/fdos11.tar.bz2 (more information here: http://joelinoff.com/blog/?p=431 )
# Extract the image
# Use dd to put the image on your prefered memory device (example: dd if=/extracted/image/fdos11.img of=/dev/sdX bs=4M)
# After it have been written to the usb device, remove it once and put it back again into your computer
# Download latest precompiled flashrom from here: http://buildbot.flashrom.org/buildresults/latest-build/dos/flashrom.exe
# Copy latest precompiled flashrom dos exe to the main directory of the usb device
# Download CWSDPMI.EXE from http://www.flashrom.org/File:Csdpmi7b.zip and extract it
# copy bin/CWSDPMI.EXE to your usb device
# Download your bios file you would like to flash and copy it to the main directory of the usb device
# Unmount the USB drive and you can now boot from it and use flashrom as described here:
#* http://linux.die.net/man/8/flashrom
#* http://flashrom.org/Board_Testing_HOWTO
= Compilation =
= Compilation =


Line 32: Line 14:
#: The cross toolchain packages for your distribution may have slightly different names (look for packages named '''djgpp''').
#: The cross toolchain packages for your distribution may have slightly different names (look for packages named '''djgpp''').
#: Alternatively, you could use a script to build it from scratch: https://github.com/andrewwutw/build-djgpp
#: Alternatively, you could use a script to build it from scratch: https://github.com/andrewwutw/build-djgpp
# You will need the libpci and libgetopt library source trees and their compiled static libraries and header files installed in some directory say libpci-libgetopt/, hich will be later specified with LIBS_BASE parameter during flashrom compilation. Easiest way to handle it is to put pciutils, libgetopt and flashrom directories in one subdirectory. There will be an extra subdirectory libpci-libgetopt created, which will contain compiled libpci and libgetopt.
# You will need the libpci and libgetopt library source trees and their compiled static libraries and header files installed in some directory say libpci-libgetopt/, which will be later specified with LIBS_BASE parameter during flashrom compilation. Easiest way to handle it is to put pciutils, libgetopt and flashrom directories in one subdirectory. There will be an extra subdirectory libpci-libgetopt created, which will contain compiled libpci and libgetopt.
# Download [https://www.kernel.org/pub/software/utils/pciutils/pciutils-3.5.6.tar.gz pciutils 3.5.6] and apply [[File:Pciutils-3.5.6.patch.gz]]
# Download [https://www.kernel.org/pub/software/utils/pciutils/pciutils-3.5.6.tar.gz pciutils 3.5.6] and apply [[File:Pciutils-3.5.6.patch.gz]]
# Compile pciutils, using following command line:<br /><code>make ZLIB=no DNS=no HOST=i386-djgpp-djgpp CROSS_COMPILE=i586-pc-msdosdjgpp- \</code><br /><code>    PREFIX=/ DESTDIR=$PWD/../libpci-libgetopt  \</code><br /><code>    STRIP="--strip-program=i586-pc-msdosdjgpp-strip -s" install install-lib</code>
# Compile pciutils, using following command line:<br /><code>make ZLIB=no DNS=no HOST=i386-djgpp-djgpp CROSS_COMPILE=i586-pc-msdosdjgpp- \</code><br /><code>    PREFIX=/ DESTDIR=$PWD/../libpci-libgetopt  \</code><br /><code>    STRIP="--strip-program=i586-pc-msdosdjgpp-strip -s" install install-lib</code>

Latest revision as of 11:57, 12 February 2019

Compilation

To cross-compile on Linux for DOS:

  1. Get packages of the DJGPP cross compiler and install them:
    • djgpp-filesystemdjgpp-gcc
    • djgpp-cpp
    • djgpp-runtime
    • djgpp-binutils
    As an alternative, the DJGPP web site offers packages for download as well:
    • djcross-binutils-2.29.1-1ap.x86_64.rpm
    • djcross-gcc-7.2.0-1ap.x86_64.rpm
    • djcrx-2.05-5.x86_64.rpm
    The cross toolchain packages for your distribution may have slightly different names (look for packages named djgpp).
    Alternatively, you could use a script to build it from scratch: https://github.com/andrewwutw/build-djgpp
  2. You will need the libpci and libgetopt library source trees and their compiled static libraries and header files installed in some directory say libpci-libgetopt/, which will be later specified with LIBS_BASE parameter during flashrom compilation. Easiest way to handle it is to put pciutils, libgetopt and flashrom directories in one subdirectory. There will be an extra subdirectory libpci-libgetopt created, which will contain compiled libpci and libgetopt.
  3. Download pciutils 3.5.6 and apply File:Pciutils-3.5.6.patch.gz
  4. Compile pciutils, using following command line:
    make ZLIB=no DNS=no HOST=i386-djgpp-djgpp CROSS_COMPILE=i586-pc-msdosdjgpp- \
    PREFIX=/ DESTDIR=$PWD/../libpci-libgetopt \
    STRIP="--strip-program=i586-pc-msdosdjgpp-strip -s" install install-lib
  5. Download and compile with 'make' File:Libgetopt.tar.gz
  6. Copy the libgetopt.a to ../libpci-libgetopt/lib and getopt.h to ../libpci-libgetopt/include
  7. Enter the flashrom directory.
    make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip LIBS_BASE=../libpci-libgetopt/ strip
  8. If you like, you can compress the resulting executable with UPX:
    upx -9 flashrom.exe
  9. To run flashrom.exe, download File:Csdpmi7b.zip and unpack CWSDPMI.EXE into the current directory or one in PATH.