DOS

From flashrom
Revision as of 08:54, 6 September 2013 by Stefanct (talk | contribs) (local mirrors, reformat)
Jump to navigation Jump to search

This wiki is retired

Our website is https://www.flashrom.org, instructions on how to add or update documentation are here

All wiki content available in read-only mode at wiki.flashrom.org

To cross-compile on Linux for DOS:

  1. Get RPMs of the cross compiler from the DJGPP site and install them (or use any other binary or source packages suitable for your distribution). You will need:
    • djcross-binutils
    • djcross-gcc
    • djcrx
  2. Download pciutils 3.1.5 and apply File:Pciutils.patch.gz (original source: http://assembler.cz/flashrom/pciutils.patch)
  3. Download and compile File:Libgetopt.tar.gz (original source: http://assembler.cz/flashrom/libgetopt/
  4. Compile pciutils, see README.DJGPP for instructions.
  5. Enter the flashrom directory.
  6. ../libpci should contain pciutils source and binaries.
  7. ../libgetopt should contain getopt.a from libgetopt.
  8. Run either (change settings where appropriate)
    make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip
    or (above settings hardcoded)
    make djgpp-dos
  9. To run flashrom.exe, download and unpack File:Csdpmi7b.zip (original source: http://homer.rice.edu/~sandmann/cwsdpmi/csdpmi7b.zip, local mirror of source: File:Csdpmi7s.zip) and make sure CWSDPMI.EXE is in the current directory when running flashrom.exe.