Difference between revisions of "Downloads"

From flashrom
Jump to: navigation, search
m (Added DOS how-to page)
(download links updated to point to the new download.flashrom.org subdomain)
Line 12: Line 12:
 
'''Manual installation from source:'''
 
'''Manual installation from source:'''
  
If you just want to use the latest release, [http://qa.coreboot.org/releases/flashrom-0.9.3.tar.bz2 download flashrom 0.9.3 (source) here] [http://qa.coreboot.org/releases/flashrom-0.9.3.tar.bz2.asc (sig)].
+
If you just want to use the latest release, [http://download.flashrom.org/releases/flashrom-0.9.3.tar.bz2 download flashrom 0.9.3 (source) here] [http://download.flashrom.org/releases/flashrom-0.9.3.tar.bz2.asc (GPG signature)]. Older releases can be found [http://download.flashrom.org/releases/?C=M;O=D here].
  
  
Line 22: Line 22:
 
  $ '''sudo make install'''
 
  $ '''sudo make install'''
  
You can also download source code snapshots [http://qa.coreboot.org/snapshots/?C=M;O=D here].
+
You can also download source code snapshots [http://download.flashrom.org/snapshots/?C=M;O=D here].
  
 
= Installation of binary packages =
 
= Installation of binary packages =

Revision as of 18:06, 18 June 2011

You can browse the flashrom source code online, or download and install flashrom and/or its source code as explained below.

Installation from source

Requirements:

  • pciutils development package (pciutils-dev/libpci-dev/pciutils-devel, depending on OS/distribution)
  • zlib development package (zlib1g-dev/zlib-devel, depending on OS/distribution)
  • libftdi development package (libftdi-dev), optional support for the external FT2232SPI flasher
  • subversion (if you checkout the source and build manually)


Manual installation from source:

If you just want to use the latest release, download flashrom 0.9.3 (source) here (GPG signature). Older releases can be found here.


If you want the latest source code (for developers), check out our code from subversion:

$ svn co svn://coreboot.org/flashrom/trunk flashrom
$ cd flashrom
$ make
$ sudo make install

You can also download source code snapshots here.

Installation of binary packages

  • Debian: sudo aptitude install flashrom
  • Ubuntu: sudo aptitude install flashrom
  • Fedora: sudo yum install flashrom
  • Gentoo: emerge flashrom
  • Mandriva: urpmi flashrom
  • openSUSE: yast -i coreboot-utils
  • T2 SDE
    • Installation from source: Emerge-Pkg flashrom
    • Installation of binaries: mine -i flashrom-0.9.1.tar.bz2
  • Source Mage GNU/Linux: cast flashrom
  • FreeBSD: cd /usr/ports/sysutils/flashrom && make install clean
The version from trunk (latest revision while writing this is r968) is usable too, but you NEED to install devel/libpci, sysutils/dmidecode and devel/gmake from ports.
Run gmake.
  • Windows: There is a (very old and probably obsolete) Windows port of the flashrom utility at DarmawanMappatutu_Salihun.tar.gz.
    In 2009, several patches for Windows, based on a more recent revision of flashrom, were made available:
    • [flashrom] GSoCs Winflashrom versus r126 [1]
    • [flashrom] [PATCH] new windows port [2]
  • DOS:
A DOS binary can be cross compiled using Linux. Instructions on how to compile can be found here: http://www.flashrom.org/trac/flashrom/browser/trunk/README#L78. Also general instuctions available here: DOS

Releases