FT2232SPI Programmer: Difference between revisions

From flashrom
Jump to navigation Jump to search
mNo edit summary
Line 4: Line 4:


* [http://www.dlpdesign.com/usb/usb1232h.shtml DLP Design DLP-USB1232H]
* [http://www.dlpdesign.com/usb/usb1232h.shtml DLP Design DLP-USB1232H]
* [http://www.ftdichip.com/Products/EvaluationKits/FT2232H_MiniModule.htm FT2232H Mini-Module Evaluation Kit]
* [http://www.ftdichip.com/Products/EvaluationKits/FT4232H_MiniModule.htm Ft4232H Mini-Module Evaluation Kit]


== Documentation ==
== Documentation ==

Revision as of 20:12, 12 July 2009

Recent versions of flashrom support the -p ft2232spi option which allows you to use a FTDI FT2232H/FT4232H based device as external SPI programmer.

Devices

Documentation

Setup

  • Put a jumper on pins 8 and 9, which configures the device to be powered by USB. Without this jumper it will not be powered, and thus not be detected by your OS (e.g. it will not appeat in the lsusb output).
  • TODO: Voltage regulator 3.3V and two capacitors.

Photos

Where to buy