Difference between revisions of "FT2232SPI Programmer"

From flashrom
Jump to navigation Jump to search
(→‎Devices: FT2232H/FT4232H Eval modules)
(→‎Documentation: Add FT4232H datasheet, link to newer version of FT2232H datasheet)
Line 10: Line 10:

* [http://www.dlpdesign.com/usb1232h-ds-v10.pdf DLP-USB1232H datasheet]
* [http://www.dlpdesign.com/usb1232h-ds-v10.pdf DLP-USB1232H datasheet]
* [http://www.dlpdesign.com/usb/ds_ft2232h.pdf FTDI FT2232H datasheet]
* [http://www.ftdichip.com/Documents/DataSheets/DS_FT2232H_V205.pdf FTDI FT2232H datasheet]
* [http://www.ftdichip.com/Documents/DataSheets/DS_FT4232H_V205.pdf FTDI FT4232H datasheet]

== Setup ==
== Setup ==

Revision as of 20:16, 12 July 2009

Recent versions of flashrom support the -p ft2232spi option which allows you to use a FTDI FT2232H/FT4232H based device as external SPI programmer.




  • Put a jumper on pins 8 and 9, which configures the device to be powered by USB. Without this jumper it will not be powered, and thus not be detected by your OS (e.g. it will not appeat in the lsusb output).
  • TODO: Voltage regulator 3.3V and two capacitors.


Where to buy