FT2232SPI Programmer

From flashrom
Revision as of 15:20, 12 July 2009 by Uwe (talk | contribs) (DLP-USB1232H page.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This wiki is retired

Our website is https://www.flashrom.org, instructions on how to add or update documentation are here

All wiki content available in read-only mode at wiki.flashrom.org

Recent versions of flashrom support the -p ft2232spi option which allows you to use a FTDI FT2232H/FT4232H based device as external SPI programmer.

Devices

Documentation

Setup

  • Put a jumper on pins 8 and 9, which configures the device to be powered by USB. Without this jumper it will not be powered, and thus not be detected by your OS (e.g. it will not appeat in the lsusb output).
  • TODO: Voltage regulator 3.3V and two capacitors.

Photos

Devices / Where to buy