Difference between revisions of "Paraflasher"

From flashrom
Jump to navigation Jump to search
Line 9: Line 9:


==Components==
==Components==
TODO
====DB25 Connector====
Type:D Sub
 
No. of Contacts:25
 
Gender:Plug
 
Contact Termination:Right Angle Through Hole
 
Used [http://www.farnell.com/datasheets/78807.pdf ITW McMurdo DB25PNF]
 
====7 Resistors====
Resistance:1kohm
 
Power Rating:250mW (1/4W)
 
Material:Metal Film
 
Used [http://www.irctt.com/pdf/CMF.pdf IRC / TT Electronics CMF1/41001FLFTR]
 
====Octal Buffer====
Package/Case:20-DIP
 
No. of Pins:20
 
IC Generic Number:74HC244
 
Supply Voltage Max:6V
 
Mounting Type:Through Hole
 
Used [http://www.st.com/stonline/books/pdf/docs/8024.pdf STMicroelectronics M74HC244B1R]
 
====Header Connector====
Gender:Header
 
No. of Contacts:16
 
Pitch Spacing:2.54mm
 
No. of Rows:2
 
Used [http://www.molex.com/catalog/pdf/MX70280.pdf Molex 10897162]
 
====USB B Connector====
Gender:Receptacle
 
No. of Contacts:4
 
Contact Termination:Right Angle Through Hole
 
Connector Mounting:PC Board
 
Used [http://www.adam-tech.com/rick/FinalSingle/CatPg127-134.pdf Adam Technologies USB-B-S-RA]
 
====PTC Resettable Fuse====
Hold Current:  0.25 Amp (250ma)
 
Trip Current:  0.5 Amp (500ma)
 
Current Rating (Max):  40 Amps
 
Used [http://www.littelfuse.com/data/en/Data_Sheets/Littelfuse_60R.pdf Littlefuse 60R025XU]
 
====Blue LED====
Bulb Size:5mm
 
LED Color:Blue
 
Forward Current:20mA
 
Forward Voltage:3.4V
 
Used [http://www.optekinc.com/datasheets/OVLFx3C7SERIES.PDF OPTEK Technology OVLFB3C7]
 
====LED Resistor====
Resistance:200 Ohms
 
Power Rating:2 Watts
 
Material:Metal Film
 
Used [http://www.vishay.com/docs/31021/cpf.pdf Vishay/Dale CPF2200R00FKE14]
 
====Linear Voltage Regulator====
Voltage Regulator Type:LDO Linear
 
Output Voltage Max:3.3V
 
Package/Case:3-TO-220
 
No. of Pins:3
 
Used [http://cache.national.com/ds/LM/LM1084.pdf National Semiconductor LM1084IT-3.3/NOPB]
 
====2 Tantalum Capacitors====
Capacitance:  10 uF
 
Tolerance:  10%
 
Voltage Rating:  10 Volts
 
Termination Style:  Axial
 
Product:  Tantalum Solid High Reliability
 
Used [http://www.vishay.com/docs/40019/173d.pdf Vishay/Sprague 173D106X9010VE3]
 
====Breadboard PCB====
External Height: TODO
 
External Width: TODO
 
Board Thickness:1.5mm
 
Pitch Spacing:2.54mm
 
Hole Diameter:1mm
 
Used a piece of [http://www.farnell.com/datasheets/98850.pdf Roth Electronik 26M2198]
 
====Hook-Up Wire====
Conductor Size AWG:30
 
Jacket Material:Polyvinylchloride (PVC)
 
No. Strands x Strand Size:Solid
 
Conductor Material:Copper
 
Used [https://edeskv2.belden.com/Products/techdata//english/swf/9978.swf 9978 013100]


==The Circuit Explained==
==The Circuit Explained==

Revision as of 04:44, 20 November 2008

THIS PAGE IS STILL UNDER CONSTRUCTION AND IS NOT LINKED ANYWHERE YET

Welcome to The LPCflasher Project. Open source hardware for developing open source software. The project is maintained by Joseph Smith.

INSERT PICTURE

Overview

The LPCflasher is low-cost simple flash programming device. It can be used to flash a variety of LPC flash chips and firmware hubs (FWH). The hope is someday it will also be able to support SPI chips. It is also meant to be modular so you can flash a variety flash chip packages. The LPCflasher is based on an old LPC programmer built to flash LPC chips on the xbox, the LPC^2 (Low Parts Count LPC Programming Cable). The LPCflasher is not for sale, it is meant for that "do-it-yourself" kind of person. Although if the project becomes popular, bare PCB's could be produced and sold at cost. Anyone with novice to moderate soldering skills can build one.

Components

DB25 Connector

Type:D Sub

No. of Contacts:25

Gender:Plug

Contact Termination:Right Angle Through Hole

Used ITW McMurdo DB25PNF

7 Resistors

Resistance:1kohm

Power Rating:250mW (1/4W)

Material:Metal Film

Used IRC / TT Electronics CMF1/41001FLFTR

Octal Buffer

Package/Case:20-DIP

No. of Pins:20

IC Generic Number:74HC244

Supply Voltage Max:6V

Mounting Type:Through Hole

Used STMicroelectronics M74HC244B1R

Header Connector

Gender:Header

No. of Contacts:16

Pitch Spacing:2.54mm

No. of Rows:2

Used Molex 10897162

USB B Connector

Gender:Receptacle

No. of Contacts:4

Contact Termination:Right Angle Through Hole

Connector Mounting:PC Board

Used Adam Technologies USB-B-S-RA

PTC Resettable Fuse

Hold Current: 0.25 Amp (250ma)

Trip Current: 0.5 Amp (500ma)

Current Rating (Max): 40 Amps

Used Littlefuse 60R025XU

Blue LED

Bulb Size:5mm

LED Color:Blue

Forward Current:20mA

Forward Voltage:3.4V

Used OPTEK Technology OVLFB3C7

LED Resistor

Resistance:200 Ohms

Power Rating:2 Watts

Material:Metal Film

Used Vishay/Dale CPF2200R00FKE14

Linear Voltage Regulator

Voltage Regulator Type:LDO Linear

Output Voltage Max:3.3V

Package/Case:3-TO-220

No. of Pins:3

Used National Semiconductor LM1084IT-3.3/NOPB

2 Tantalum Capacitors

Capacitance: 10 uF

Tolerance: 10%

Voltage Rating: 10 Volts

Termination Style: Axial

Product: Tantalum Solid High Reliability

Used Vishay/Sprague 173D106X9010VE3

Breadboard PCB

External Height: TODO

External Width: TODO

Board Thickness:1.5mm

Pitch Spacing:2.54mm

Hole Diameter:1mm

Used a piece of Roth Electronik 26M2198

Hook-Up Wire

Conductor Size AWG:30

Jacket Material:Polyvinylchloride (PVC)

No. Strands x Strand Size:Solid

Conductor Material:Copper

Used 9978 013100

The Circuit Explained

TODO

Daughter Boards

TODO

Software

TODO: flashrom???

Support

TODO

Conclusion

TODO