Paraflasher: Difference between revisions

From flashrom
Jump to navigation Jump to search
No edit summary
Line 9: Line 9:


==Components==
==Components==
====DB25 Connector====
{| border="0" cellpadding="2"
Type:D Sub


No. of Contacts:25
|- bgcolor="#dddddd"
! DB25 Connector
| Type:D Sub
| No. of Contacts:25
| Gender:Plug
| Contact Termination:Right Angle Through Hole
| Used [http://www.farnell.com/datasheets/78807.pdf ITW McMurdo DB25PNF]


Gender:Plug
|- bgcolor="#eeeeee"
! 7 Resistors
| Resistance:1kohm
| Power Rating:250mW (1/4W)
| Material:Metal Film
|
| Used [http://www.irctt.com/pdf/CMF.pdf IRC / TT Electronics CMF1/41001FLFTR]


Contact Termination:Right Angle Through Hole
|- bgcolor="#dddddd"
! Octal Buffer
| Package/Case:20-DIP
| IC Generic Number:74HC244
| Supply Voltage Max:6V
| Mounting Type:Through Hole
| Used [http://www.st.com/stonline/books/pdf/docs/8024.pdf STMicroelectronics M74HC244B1R]


Used [http://www.farnell.com/datasheets/78807.pdf ITW McMurdo DB25PNF]
|- bgcolor="#eeeeee"
 
! Header Connector
====7 Resistors====
| Gender:Header
Resistance:1kohm
| No. of Contacts:16
 
| Pitch Spacing:2.54mm
Power Rating:250mW (1/4W)
| No. of Rows:2
 
| Used [http://www.molex.com/catalog/pdf/MX70280.pdf Molex 10897162]
Material:Metal Film
|}
 
Used [http://www.irctt.com/pdf/CMF.pdf IRC / TT Electronics CMF1/41001FLFTR]
 
====Octal Buffer====
Package/Case:20-DIP
 
No. of Pins:20
 
IC Generic Number:74HC244
 
Supply Voltage Max:6V
 
Mounting Type:Through Hole
 
Used [http://www.st.com/stonline/books/pdf/docs/8024.pdf STMicroelectronics M74HC244B1R]
 
====Header Connector====
Gender:Header
 
No. of Contacts:16
 
Pitch Spacing:2.54mm
 
No. of Rows:2
 
Used [http://www.molex.com/catalog/pdf/MX70280.pdf Molex 10897162]


====USB B Connector====
====USB B Connector====

Revision as of 13:19, 20 November 2008

THIS PAGE IS STILL UNDER CONSTRUCTION AND IS NOT LINKED ANYWHERE YET

Welcome to The LPCflasher Project. Open source hardware for developing open source software. The project is maintained by Joseph Smith.

INSERT PICTURE

Overview

The LPCflasher is low-cost simple flash programming device. It can be used to flash a variety of LPC flash chips and firmware hubs (FWH). The hope is someday it will also be able to support SPI chips. It is also meant to be modular so you can flash a variety flash chip packages. The LPCflasher is based on an old LPC programmer built to flash LPC chips on the xbox, the LPC^2 (Low Parts Count LPC Programming Cable). The LPCflasher is not for sale, it is meant for that "do-it-yourself" kind of person. Although if the project becomes popular, bare PCB's could be produced and sold at cost. Anyone with novice to moderate soldering skills can build one.

Components

DB25 Connector Type:D Sub No. of Contacts:25 Gender:Plug Contact Termination:Right Angle Through Hole Used ITW McMurdo DB25PNF
7 Resistors Resistance:1kohm Power Rating:250mW (1/4W) Material:Metal Film Used IRC / TT Electronics CMF1/41001FLFTR
Octal Buffer Package/Case:20-DIP IC Generic Number:74HC244 Supply Voltage Max:6V Mounting Type:Through Hole Used STMicroelectronics M74HC244B1R
Header Connector Gender:Header No. of Contacts:16 Pitch Spacing:2.54mm No. of Rows:2 Used Molex 10897162

USB B Connector

Gender:Receptacle

No. of Contacts:4

Contact Termination:Right Angle Through Hole

Connector Mounting:PC Board

Used Adam Technologies USB-B-S-RA

PTC Resettable Fuse

Hold Current: 0.25 Amp (250ma)

Trip Current: 0.5 Amp (500ma)

Current Rating (Max): 40 Amps

Used Littlefuse 60R025XU

Blue LED

Bulb Size:5mm

LED Color:Blue

Forward Current:20mA

Forward Voltage:3.4V

Used OPTEK Technology OVLFB3C7

LED Resistor

Resistance:200 Ohms

Power Rating:2 Watts

Material:Metal Film

Used Vishay/Dale CPF2200R00FKE14

Linear Voltage Regulator

Voltage Regulator Type:LDO Linear

Output Voltage Max:3.3V

Package/Case:3-TO-220

No. of Pins:3

Used National Semiconductor LM1084IT-3.3/NOPB

2 Tantalum Capacitors

Capacitance: 10 uF

Tolerance: 10%

Voltage Rating: 10 Volts

Termination Style: Axial

Product: Tantalum Solid High Reliability

Used Vishay/Sprague 173D106X9010VE3

Breadboard PCB

External Height: TODO

External Width: TODO

Board Thickness:1.5mm

Pitch Spacing:2.54mm

Hole Diameter:1mm

Used a piece of Roth Electronik 26M2198

Hook-Up Wire

Conductor Size AWG:30

Jacket Material:Polyvinylchloride (PVC)

No. Strands x Strand Size:Solid

Conductor Material:Copper

Used Belden 9978 013100

The Circuit Explained

TODO

Daughter Boards

TODO

Software

TODO: flashrom???

Support

TODO

Conclusion

TODO